You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

128 lines
5.2 KiB

  1. // CSMA/CD protocol - probabilistic version of kronos model (3 stations)
  2. // gxn/dxp 04/12/01
  3. mdp
  4. // note made changes since cannot have strict inequalities
  5. // in digital clocks approach and suppose a station only sends one message
  6. // simplified parameters scaled
  7. const int sigma=1; // time for messages to propagate along the bus
  8. const int lambda=30; // time to send a message
  9. // actual parameters
  10. const int N = 2; // number of processes
  11. const int K = 4; // exponential backoff limit
  12. const int slot = 2*sigma; // length of slot
  13. const int M = 15 ; // max number of slots to wait
  14. //const int lambda=782;
  15. //const int sigma=26;
  16. //----------------------------------------------------------------------------------------------------------------------------
  17. // the bus
  18. module bus
  19. b : [0..2];
  20. // b=0 - idle
  21. // b=1 - active
  22. // b=2 - collision
  23. // clocks of bus
  24. y1 : [0..sigma+1]; // time since first send (used find time until channel sensed busy)
  25. y2 : [0..sigma+1]; // time since second send (used to find time until collision detected)
  26. // a sender sends (ok - no other message being sent)
  27. [send1] (b=0) -> (b'=1);
  28. [send2] (b=0) -> (b'=1);
  29. // a sender sends (bus busy - collision)
  30. [send1] (b=1|b=2) & (y1<sigma) -> (b'=2);
  31. [send2] (b=1|b=2) & (y1<sigma) -> (b'=2);
  32. // finish sending
  33. [end1] (b=1) -> (b'=0) & (y1'=0);
  34. [end2] (b=1) -> (b'=0) & (y1'=0);
  35. // bus busy
  36. [busy1] (b=1|b=2) & (y1>=sigma) -> (b'=b);
  37. [busy2] (b=1|b=2) & (y1>=sigma) -> (b'=b);
  38. // collision detected
  39. [cd] (b=2) & (y2<=sigma) -> (b'=0) & (y1'=0) & (y2'=0);
  40. // time passage
  41. [time] (b=0) -> (y1'=0); // value of y1/y2 does not matter in state 0
  42. [time] (b=1) -> (y1'=min(y1+1,sigma+1)); // no invariant in state 1
  43. [time] (b=2) & (y2<sigma) -> (y1'=min(y1+1,sigma+1)) & (y2'=min(y2+1,sigma+1)); // invariant in state 2 (time until collision detected)
  44. endmodule
  45. //----------------------------------------------------------------------------------------------------------------------------
  46. // model of first sender
  47. module station1
  48. // LOCAL STATE
  49. s1 : [0..5];
  50. // s1=0 - initial state
  51. // s1=1 - transmit
  52. // s1=2 - collision (set backoff)
  53. // s1=3 - wait (bus busy)
  54. // s1=4 - successfully sent
  55. // LOCAL CLOCK
  56. x1 : [0..max(lambda,slot)];
  57. // BACKOFF COUNTER (number of slots to wait)
  58. bc1 : [0..M];
  59. // COLLISION COUNTER
  60. cd1 : [0..K];
  61. // start sending
  62. [send1] (s1=0) -> (s1'=1) & (x1'=0); // start sending
  63. [busy1] (s1=0) -> (s1'=2) & (x1'=0) & (cd1'=min(K,cd1+1)); // detects channel is busy so go into backoff
  64. // transmitting
  65. [time] (s1=1) & (x1<lambda) -> (x1'=min(x1+1,lambda)); // let time pass
  66. [end1] (s1=1) & (x1=lambda) -> (s1'=4) & (x1'=0); // finished
  67. [cd] (s1=1) -> (s1'=2) & (x1'=0) & (cd1'=min(K,cd1+1)); // collision detected (increment backoff counter)
  68. [cd] !(s1=1) -> (s1'=s1); // add loop for collision detection when not important
  69. // set backoff (no time can pass in this state)
  70. // probability depends on which transmission this is (cd1)
  71. [] s1=2 & cd1=1 -> 1/2 : (s1'=3) & (bc1'=0) + 1/2 : (s1'=3) & (bc1'=1) ;
  72. [] s1=2 & cd1=2 -> 1/4 : (s1'=3) & (bc1'=0) + 1/4 : (s1'=3) & (bc1'=1) + 1/4 : (s1'=3) & (bc1'=2) + 1/4 : (s1'=3) & (bc1'=3) ;
  73. [] s1=2 & cd1=3 -> 1/8 : (s1'=3) & (bc1'=0) + 1/8 : (s1'=3) & (bc1'=1) + 1/8 : (s1'=3) & (bc1'=2) + 1/8 : (s1'=3) & (bc1'=3) + 1/8 : (s1'=3) & (bc1'=4) + 1/8 : (s1'=3) & (bc1'=5) + 1/8 : (s1'=3) & (bc1'=6) + 1/8 : (s1'=3) & (bc1'=7) ;
  74. [] s1=2 & cd1=4 -> 1/16 : (s1'=3) & (bc1'=0) + 1/16 : (s1'=3) & (bc1'=1) + 1/16 : (s1'=3) & (bc1'=2) + 1/16 : (s1'=3) & (bc1'=3) + 1/16 : (s1'=3) & (bc1'=4) + 1/16 : (s1'=3) & (bc1'=5) + 1/16 : (s1'=3) & (bc1'=6) + 1/16 : (s1'=3) & (bc1'=7) + 1/16 : (s1'=3) & (bc1'=8) + 1/16 : (s1'=3) & (bc1'=9) + 1/16 : (s1'=3) & (bc1'=10) + 1/16 : (s1'=3) & (bc1'=11) + 1/16 : (s1'=3) & (bc1'=12) + 1/16 : (s1'=3) & (bc1'=13) + 1/16 : (s1'=3) & (bc1'=14) + 1/16 : (s1'=3) & (bc1'=15) ;
  75. // wait until backoff counter reaches 0 then send again
  76. [time] (s1=3) & (x1<slot) -> (x1'=x1+1); // let time pass (in slot)
  77. [time] (s1=3) & (x1=slot) & (bc1>0) -> (x1'=1) & (bc1'=bc1-1); // let time pass (move slots)
  78. [send1] (s1=3) & (x1=slot) & (bc1=0) -> (s1'=1) & (x1'=0); // finished backoff (bus appears free)
  79. [busy1] (s1=3) & (x1=slot) & (bc1=0) -> (s1'=2) & (x1'=0) & (cd1'=min(K,cd1+1)); // finished backoff (bus busy)
  80. // once finished nothing matters
  81. [time] (s1>=4) -> (x1'=0);
  82. endmodule
  83. //----------------------------------------------------------------------------------------------------------------------------
  84. // construct further stations through renaming
  85. module station2=station1[s1=s2,x1=x2,cd1=cd2,bc1=bc2,send1=send2,busy1=busy2,end1=end2] endmodule
  86. //----------------------------------------------------------------------------------------------------------------------------
  87. // reward structure for expected time
  88. rewards "time"
  89. [time] true : 1;
  90. endrewards
  91. //----------------------------------------------------------------------------------------------------------------------------
  92. // labels/formulae
  93. label "all_delivered" = s1=4&s2=4;
  94. label "one_delivered" = s1=4|s2=4;
  95. label "collision_max_backoff" = (cd1=K & s1=1 & b=2)|(cd2=K & s2=1 & b=2);