This is cln.info, produced by makeinfo version 4.0 from cln.texi. This file documents CLN, a Class Library for Numbers. Published by Bruno Haible, `' and Richard Kreckel, `'. Copyright (C) Bruno Haible 1995, 1996, 1997, 1998, 1999, 2000. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the author.  File: cln.info, Node: Top, Next: Introduction, Prev: (dir), Up: (dir) * Menu: * Introduction:: * Installation:: * Ordinary number types:: * Functions on numbers:: * Input/Output:: * Rings:: * Modular integers:: * Symbolic data types:: * Univariate polynomials:: * Internals:: * Using the library:: * Customizing:: * Index:: --- The Detailed Node Listing --- Installation * Prerequisites:: * Building the library:: * Installing the library:: * Cleaning up:: Prerequisites * C++ compiler:: * Make utility:: * Sed utility:: Building the library * Using the GNU MP Library:: Ordinary number types * Exact numbers:: * Floating-point numbers:: * Complex numbers:: * Conversions:: Functions on numbers * Constructing numbers:: * Elementary functions:: * Elementary rational functions:: * Elementary complex functions:: * Comparisons:: * Rounding functions:: * Roots:: * Transcendental functions:: * Functions on integers:: * Functions on floating-point numbers:: * Conversion functions:: * Random number generators:: * Obfuscating operators:: Constructing numbers * Constructing integers:: * Constructing rational numbers:: * Constructing floating-point numbers:: * Constructing complex numbers:: Transcendental functions * Exponential and logarithmic functions:: * Trigonometric functions:: * Hyperbolic functions:: * Euler gamma:: * Riemann zeta:: Functions on integers * Logical functions:: * Number theoretic functions:: * Combinatorial functions:: Conversion functions * Conversion to floating-point numbers:: * Conversion to rational numbers:: Input/Output * Internal and printed representation:: * Input functions:: * Output functions:: Modular integers * Modular integer rings:: * Functions on modular integers:: Symbolic data types * Strings:: * Symbols:: Univariate polynomials * Univariate polynomial rings:: * Functions on univariate polynomials:: * Special polynomials:: Internals * Why C++ ?:: * Memory efficiency:: * Speed efficiency:: * Garbage collection:: Using the library * Compiler options:: * Compatibility to old CLN versions:: * Include files:: * An Example:: * Debugging support:: Customizing * Error handling:: * Floating-point underflow:: * Customizing I/O:: * Customizing the memory allocator::  File: cln.info, Node: Introduction, Next: Installation, Prev: Top, Up: Top Introduction ************ CLN is a library for computations with all kinds of numbers. It has a rich set of number classes: * Integers (with unlimited precision), * Rational numbers, * Floating-point numbers: - Short float, - Single float, - Double float, - Long float (with unlimited precision), * Complex numbers, * Modular integers (integers modulo a fixed integer), * Univariate polynomials. The subtypes of the complex numbers among these are exactly the types of numbers known to the Common Lisp language. Therefore `CLN' can be used for Common Lisp implementations, giving `CLN' another meaning: it becomes an abbreviation of "Common Lisp Numbers". The CLN package implements * Elementary functions (`+', `-', `*', `/', `sqrt', comparisons, ...), * Logical functions (logical `and', `or', `not', ...), * Transcendental functions (exponential, logarithmic, trigonometric, hyperbolic functions and their inverse functions). CLN is a C++ library. Using C++ as an implementation language provides * efficiency: it compiles to machine code, * type safety: the C++ compiler knows about the number types and complains if, for example, you try to assign a float to an integer variable. * algebraic syntax: You can use the `+', `-', `*', `=', `==', ... operators as in C or C++. CLN is memory efficient: * Small integers and short floats are immediate, not heap allocated. * Heap-allocated memory is reclaimed through an automatic, non-interruptive garbage collection. CLN is speed efficient: * The kernel of CLN has been written in assembly language for some CPUs (`i386', `m68k', `sparc', `mips', `arm'). * On all CPUs, CLN may be configured to use the superefficient low-level routines from GNU GMP version 3. * It uses Karatsuba multiplication, which is significantly faster for large numbers than the standard multiplication algorithm. * For very large numbers (more than 12000 decimal digits), it uses Schönhage-Strassen multiplication, which is an asymptotically optimal multiplication algorithm, for multiplication, division and radix conversion. CLN aims at being easily integrated into larger software packages: * The garbage collection imposes no burden on the main application. * The library provides hooks for memory allocation and exceptions. * All non-macro identifiers are hidden in namespace `cln' in order to avoid name clashes.  File: cln.info, Node: Installation, Next: Ordinary number types, Prev: Introduction, Up: Top Installation ************ This section describes how to install the CLN package on your system. * Menu: * Prerequisites:: * Building the library:: * Installing the library:: * Cleaning up::  File: cln.info, Node: Prerequisites, Next: Building the library, Prev: Installation, Up: Installation Prerequisites ============= * Menu: * C++ compiler:: * Make utility:: * Sed utility::  File: cln.info, Node: C++ compiler, Next: Make utility, Prev: Prerequisites, Up: Prerequisites C++ compiler ------------ To build CLN, you need a C++ compiler. Actually, you need GNU `g++ 2.90' or newer, the EGCS compilers will do. I recommend GNU `g++ 2.95' or newer. The following C++ features are used: classes, member functions, overloading of functions and operators, constructors and destructors, inline, const, multiple inheritance, templates and namespaces. The following C++ features are not used: `new', `delete', virtual inheritance, exceptions. CLN relies on semi-automatic ordering of initializations of static and global variables, a feature which I could implement for GNU g++ only.  File: cln.info, Node: Make utility, Next: Sed utility, Prev: C++ compiler, Up: Prerequisites Make utility ------------ To build CLN, you also need to have GNU `make' installed.  File: cln.info, Node: Sed utility, Prev: Make utility, Up: Prerequisites Sed utility ----------- To build CLN on HP-UX, you also need to have GNU `sed' installed. This is because the libtool script, which creates the CLN library, relies on `sed', and the vendor's `sed' utility on these systems is too limited.  File: cln.info, Node: Building the library, Next: Installing the library, Prev: Prerequisites, Up: Installation Building the library ==================== As with any autoconfiguring GNU software, installation is as easy as this: $ ./configure $ make $ make check If on your system, `make' is not GNU `make', you have to use `gmake' instead of `make' above. The `configure' command checks out some features of your system and C++ compiler and builds the `Makefile's. The `make' command builds the library. This step may take 4 hours on an average workstation. The `make check' runs some test to check that no important subroutine has been miscompiled. The `configure' command accepts options. To get a summary of them, try $ ./configure --help Some of the options are explained in detail in the `INSTALL.generic' file. You can specify the C compiler, the C++ compiler and their options through the following environment variables when running `configure': `CC' Specifies the C compiler. `CFLAGS' Flags to be given to the C compiler when compiling programs (not when linking). `CXX' Specifies the C++ compiler. `CXXFLAGS' Flags to be given to the C++ compiler when compiling programs (not when linking). Examples: $ CC="gcc" CFLAGS="-O" CXX="g++" CXXFLAGS="-O" ./configure $ CC="gcc -V egcs-2.91.60" CFLAGS="-O -g" \ CXX="g++ -V egcs-2.91.60" CXXFLAGS="-O -g" ./configure $ CC="gcc -V 2.95.2" CFLAGS="-O2 -fno-exceptions" \ CXX="g++ -V 2.95.2" CFLAGS="-O2 -fno-exceptions" ./configure Note that for these environment variables to take effect, you have to set them (assuming a Bourne-compatible shell) on the same line as the `configure' command. If you made the settings in earlier shell commands, you have to `export' the environment variables before calling `configure'. In a `csh' shell, you have to use the `setenv' command for setting each of the environment variables. Currently CLN works only with the GNU `g++' compiler, and only in optimizing mode. So you should specify at least `-O' in the CXXFLAGS, or no CXXFLAGS at all. (If CXXFLAGS is not set, CLN will use `-O'.) If you use `g++' version 2.8.x or egcs-2.91.x (a.k.a. egcs-1.1) or gcc-2.95.x, I recommend adding `-fno-exceptions' to the CXXFLAGS. This will likely generate better code. If you use `g++' version egcs-2.91.x (egcs-1.1) or gcc-2.95.x on Sparc, add either `-O', `-O1' or `-O2 -fno-schedule-insns' to the CXXFLAGS. With full `-O2', `g++' miscompiles the division routines. Also, if you have `g++' version egcs-1.1.1 or older on Sparc, you must specify `--disable-shared' because `g++' would miscompile parts of the library. By default, both a shared and a static library are built. You can build CLN as a static (or shared) library only, by calling `configure' with the option `--disable-shared' (or `--disable-static'). While shared libraries are usually more convenient to use, they may not work on all architectures. Try disabling them if you run into linker problems. Also, they are generally somewhat slower than static libraries so runtime-critical applications should be linked statically. * Menu: * Using the GNU MP Library::  File: cln.info, Node: Using the GNU MP Library, Prev: Building the library, Up: Building the library Using the GNU MP Library ------------------------ Starting with version 1.1, CLN may be configured to make use of a preinstalled `gmp' library. Please make sure that you have at least `gmp' version 3.0 installed since earlier versions are unsupported and likely not to work. Enabling this feature by calling `configure' with the option `--with-gmp' is known to be quite a boost for CLN's performance. If you have installed the `gmp' library and its header file in some place where your compiler cannot find it by default, you must help `configure' by setting `CPPFLAGS' and `LDFLAGS'. Here is an example: $ CC="gcc" CFLAGS="-O2" CXX="g++" CXXFLAGS="-O2 -fno-exceptions" \ CPPFLAGS="-I/opt/gmp/include" LDFLAGS="-L/opt/gmp/lib" ./configure --with-gmp  File: cln.info, Node: Installing the library, Next: Cleaning up, Prev: Building the library, Up: Installation Installing the library ====================== As with any autoconfiguring GNU software, installation is as easy as this: $ make install The `make install' command installs the library and the include files into public places (`/usr/local/lib/' and `/usr/local/include/', if you haven't specified a `--prefix' option to `configure'). This step may require superuser privileges. If you have already built the library and wish to install it, but didn't specify `--prefix=...' at configure time, just re-run `configure', giving it the same options as the first time, plus the `--prefix=...' option.  File: cln.info, Node: Cleaning up, Prev: Installing the library, Up: Installation Cleaning up =========== You can remove system-dependent files generated by `make' through $ make clean You can remove all files generated by `make', thus reverting to a virgin distribution of CLN, through $ make distclean  File: cln.info, Node: Ordinary number types, Next: Functions on numbers, Prev: Installation, Up: Top Ordinary number types ********************* CLN implements the following class hierarchy: Number cl_number | | Real or complex number cl_N | | Real number cl_R | +-------------------+-------------------+ | | Rational number Floating-point number cl_RA cl_F | | | +--------------+--------------+--------------+ Integer | | | | cl_I Short-Float Single-Float Double-Float Long-Float cl_SF cl_FF cl_DF cl_LF The base class `cl_number' is an abstract base class. It is not useful to declare a variable of this type except if you want to completely disable compile-time type checking and use run-time type checking instead. The class `cl_N' comprises real and complex numbers. There is no special class for complex numbers since complex numbers with imaginary part `0' are automatically converted to real numbers. The class `cl_R' comprises real numbers of different kinds. It is an abstract class. The class `cl_RA' comprises exact real numbers: rational numbers, including integers. There is no special class for non-integral rational numbers since rational numbers with denominator `1' are automatically converted to integers. The class `cl_F' implements floating-point approximations to real numbers. It is an abstract class. * Menu: * Exact numbers:: * Floating-point numbers:: * Complex numbers:: * Conversions::  File: cln.info, Node: Exact numbers, Next: Floating-point numbers, Prev: Ordinary number types, Up: Ordinary number types Exact numbers ============= Some numbers are represented as exact numbers: there is no loss of information when such a number is converted from its mathematical value to its internal representation. On exact numbers, the elementary operations (`+', `-', `*', `/', comparisons, ...) compute the completely correct result. In CLN, the exact numbers are: * rational numbers (including integers), * complex numbers whose real and imaginary parts are both rational numbers. Rational numbers are always normalized to the form `NUMERATOR/DENOMINATOR' where the numerator and denominator are coprime integers and the denominator is positive. If the resulting denominator is `1', the rational number is converted to an integer. Small integers (typically in the range `-2^30'...`2^30-1', for 32-bit machines) are especially efficient, because they consume no heap allocation. Otherwise the distinction between these immediate integers (called "fixnums") and heap allocated integers (called "bignums") is completely transparent.  File: cln.info, Node: Floating-point numbers, Next: Complex numbers, Prev: Exact numbers, Up: Ordinary number types Floating-point numbers ====================== Not all real numbers can be represented exactly. (There is an easy mathematical proof for this: Only a countable set of numbers can be stored exactly in a computer, even if one assumes that it has unlimited storage. But there are uncountably many real numbers.) So some approximation is needed. CLN implements ordinary floating-point numbers, with mantissa and exponent. The elementary operations (`+', `-', `*', `/', ...) only return approximate results. For example, the value of the expression `(cl_F) 0.3 + (cl_F) 0.4' prints as `0.70000005', not as `0.7'. Rounding errors like this one are inevitable when computing with floating-point numbers. Nevertheless, CLN rounds the floating-point results of the operations `+', `-', `*', `/', `sqrt' according to the "round-to-even" rule: It first computes the exact mathematical result and then returns the floating-point number which is nearest to this. If two floating-point numbers are equally distant from the ideal result, the one with a `0' in its least significant mantissa bit is chosen. Similarly, testing floating point numbers for equality `x == y' is gambling with random errors. Better check for `abs(x - y) < epsilon' for some well-chosen `epsilon'. Floating point numbers come in four flavors: * Short floats, type `cl_SF'. They have 1 sign bit, 8 exponent bits (including the exponent's sign), and 17 mantissa bits (including the "hidden" bit). They don't consume heap allocation. * Single floats, type `cl_FF'. They have 1 sign bit, 8 exponent bits (including the exponent's sign), and 24 mantissa bits (including the "hidden" bit). In CLN, they are represented as IEEE single-precision floating point numbers. This corresponds closely to the C/C++ type `float'. * Double floats, type `cl_DF'. They have 1 sign bit, 11 exponent bits (including the exponent's sign), and 53 mantissa bits (including the "hidden" bit). In CLN, they are represented as IEEE double-precision floating point numbers. This corresponds closely to the C/C++ type `double'. * Long floats, type `cl_LF'. They have 1 sign bit, 32 exponent bits (including the exponent's sign), and n mantissa bits (including the "hidden" bit), where n >= 64. The precision of a long float is unlimited, but once created, a long float has a fixed precision. (No "lazy recomputation".) Of course, computations with long floats are more expensive than those with smaller floating-point formats. CLN does not implement features like NaNs, denormalized numbers and gradual underflow. If the exponent range of some floating-point type is too limited for your application, choose another floating-point type with larger exponent range. As a user of CLN, you can forget about the differences between the four floating-point types and just declare all your floating-point variables as being of type `cl_F'. This has the advantage that when you change the precision of some computation (say, from `cl_DF' to `cl_LF'), you don't have to change the code, only the precision of the initial values. Also, many transcendental functions have been declared as returning a `cl_F' when the argument is a `cl_F', but such declarations are missing for the types `cl_SF', `cl_FF', `cl_DF', `cl_LF'. (Such declarations would be wrong if the floating point contagion rule happened to change in the future.)  File: cln.info, Node: Complex numbers, Next: Conversions, Prev: Floating-point numbers, Up: Ordinary number types Complex numbers =============== Complex numbers, as implemented by the class `cl_N', have a real part and an imaginary part, both real numbers. A complex number whose imaginary part is the exact number `0' is automatically converted to a real number. Complex numbers can arise from real numbers alone, for example through application of `sqrt' or transcendental functions.  File: cln.info, Node: Conversions, Prev: Complex numbers, Up: Ordinary number types Conversions =========== Conversions from any class to any its superclasses ("base classes" in C++ terminology) is done automatically. Conversions from the C built-in types `long' and `unsigned long' are provided for the classes `cl_I', `cl_RA', `cl_R', `cl_N' and `cl_number'. Conversions from the C built-in types `int' and `unsigned int' are provided for the classes `cl_I', `cl_RA', `cl_R', `cl_N' and `cl_number'. However, these conversions emphasize efficiency. Their range is therefore limited: - The conversion from `int' works only if the argument is < 2^29 and > -2^29. - The conversion from `unsigned int' works only if the argument is < 2^29. In a declaration like `cl_I x = 10;' the C++ compiler is able to do the conversion of `10' from `int' to `cl_I' at compile time already. On the other hand, code like `cl_I x = 1000000000;' is in error. So, if you want to be sure that an `int' whose magnitude is not guaranteed to be < 2^29 is correctly converted to a `cl_I', first convert it to a `long'. Similarly, if a large `unsigned int' is to be converted to a `cl_I', first convert it to an `unsigned long'. Conversions from the C built-in type `float' are provided for the classes `cl_FF', `cl_F', `cl_R', `cl_N' and `cl_number'. Conversions from the C built-in type `double' are provided for the classes `cl_DF', `cl_F', `cl_R', `cl_N' and `cl_number'. Conversions from `const char *' are provided for the classes `cl_I', `cl_RA', `cl_SF', `cl_FF', `cl_DF', `cl_LF', `cl_F', `cl_R', `cl_N'. The easiest way to specify a value which is outside of the range of the C++ built-in types is therefore to specify it as a string, like this: cl_I order_of_rubiks_cube_group = "43252003274489856000"; Note that this conversion is done at runtime, not at compile-time. Conversions from `cl_I' to the C built-in types `int', `unsigned int', `long', `unsigned long' are provided through the functions `int cl_I_to_int (const cl_I& x)' `unsigned int cl_I_to_uint (const cl_I& x)' `long cl_I_to_long (const cl_I& x)' `unsigned long cl_I_to_ulong (const cl_I& x)' Returns `x' as element of the C type CTYPE. If `x' is not representable in the range of CTYPE, a runtime error occurs. Conversions from the classes `cl_I', `cl_RA', `cl_SF', `cl_FF', `cl_DF', `cl_LF', `cl_F' and `cl_R' to the C built-in types `float' and `double' are provided through the functions `float float_approx (const TYPE& x)' `double double_approx (const TYPE& x)' Returns an approximation of `x' of C type CTYPE. If `abs(x)' is too close to 0 (underflow), 0 is returned. If `abs(x)' is too large (overflow), an IEEE infinity is returned. Conversions from any class to any of its subclasses ("derived classes" in C++ terminology) are not provided. Instead, you can assert and check that a value belongs to a certain subclass, and return it as element of that class, using the `As' and `The' macros. `As(TYPE)(VALUE)' checks that VALUE belongs to TYPE and returns it as such. `The(TYPE)(VALUE)' assumes that VALUE belongs to TYPE and returns it as such. It is your responsibility to ensure that this assumption is valid. Example: cl_I x = ...; if (!(x >= 0)) abort(); cl_I ten_x = The(cl_I)(expt(10,x)); // If x >= 0, 10^x is an integer. // In general, it would be a rational number.  File: cln.info, Node: Functions on numbers, Next: Input/Output, Prev: Ordinary number types, Up: Top Functions on numbers ******************** Each of the number classes declares its mathematical operations in the corresponding include file. For example, if your code operates with objects of type `cl_I', it should `#include '. * Menu: * Constructing numbers:: * Elementary functions:: * Elementary rational functions:: * Elementary complex functions:: * Comparisons:: * Rounding functions:: * Roots:: * Transcendental functions:: * Functions on integers:: * Functions on floating-point numbers:: * Conversion functions:: * Random number generators:: * Obfuscating operators::  File: cln.info, Node: Constructing numbers, Next: Elementary functions, Prev: Functions on numbers, Up: Functions on numbers Constructing numbers ==================== Here is how to create number objects "from nothing". * Menu: * Constructing integers:: * Constructing rational numbers:: * Constructing floating-point numbers:: * Constructing complex numbers::  File: cln.info, Node: Constructing integers, Next: Constructing rational numbers, Prev: Constructing numbers, Up: Constructing numbers Constructing integers --------------------- `cl_I' objects are most easily constructed from C integers and from strings. See *Note Conversions::.  File: cln.info, Node: Constructing rational numbers, Next: Constructing floating-point numbers, Prev: Constructing integers, Up: Constructing numbers Constructing rational numbers ----------------------------- `cl_RA' objects can be constructed from strings. The syntax for rational numbers is described in *Note Internal and printed representation::. Another standard way to produce a rational number is through application of `operator /' or `recip' on integers.  File: cln.info, Node: Constructing floating-point numbers, Next: Constructing complex numbers, Prev: Constructing rational numbers, Up: Constructing numbers Constructing floating-point numbers ----------------------------------- `cl_F' objects with low precision are most easily constructed from C `float' and `double'. See *Note Conversions::. To construct a `cl_F' with high precision, you can use the conversion from `const char *', but you have to specify the desired precision within the string. (See *Note Internal and printed representation::.) Example: cl_F e = "0.271828182845904523536028747135266249775724709369996e+1_40"; will set `e' to the given value, with a precision of 40 decimal digits. The programmatic way to construct a `cl_F' with high precision is through the `cl_float' conversion function, see *Note Conversion to floating-point numbers::. For example, to compute `e' to 40 decimal places, first construct 1.0 to 40 decimal places and then apply the exponential function: cl_float_format_t precision = cl_float_format(40); cl_F e = exp(cl_float(1,precision));  File: cln.info, Node: Constructing complex numbers, Prev: Constructing floating-point numbers, Up: Constructing numbers Constructing complex numbers ---------------------------- Non-real `cl_N' objects are normally constructed through the function cl_N complex (const cl_R& realpart, const cl_R& imagpart) See *Note Elementary complex functions::.  File: cln.info, Node: Elementary functions, Next: Elementary rational functions, Prev: Constructing numbers, Up: Functions on numbers Elementary functions ==================== Each of the classes `cl_N', `cl_R', `cl_RA', `cl_I', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operations: `TYPE operator + (const TYPE&, const TYPE&)' Addition. `TYPE operator - (const TYPE&, const TYPE&)' Subtraction. `TYPE operator - (const TYPE&)' Returns the negative of the argument. `TYPE plus1 (const TYPE& x)' Returns `x + 1'. `TYPE minus1 (const TYPE& x)' Returns `x - 1'. `TYPE operator * (const TYPE&, const TYPE&)' Multiplication. `TYPE square (const TYPE& x)' Returns `x * x'. Each of the classes `cl_N', `cl_R', `cl_RA', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operations: `TYPE operator / (const TYPE&, const TYPE&)' Division. `TYPE recip (const TYPE&)' Returns the reciprocal of the argument. The class `cl_I' doesn't define a `/' operation because in the C/C++ language this operator, applied to integral types, denotes the `floor' or `truncate' operation (which one of these, is implementation dependent). (*Note Rounding functions::.) Instead, `cl_I' defines an "exact quotient" function: `cl_I exquo (const cl_I& x, const cl_I& y)' Checks that `y' divides `x', and returns the quotient `x'/`y'. The following exponentiation functions are defined: `cl_I expt_pos (const cl_I& x, const cl_I& y)' `cl_RA expt_pos (const cl_RA& x, const cl_I& y)' `y' must be > 0. Returns `x^y'. `cl_RA expt (const cl_RA& x, const cl_I& y)' `cl_R expt (const cl_R& x, const cl_I& y)' `cl_N expt (const cl_N& x, const cl_I& y)' Returns `x^y'. Each of the classes `cl_R', `cl_RA', `cl_I', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operation: `TYPE abs (const TYPE& x)' Returns the absolute value of `x'. This is `x' if `x >= 0', and `-x' if `x <= 0'. The class `cl_N' implements this as follows: `cl_R abs (const cl_N x)' Returns the absolute value of `x'. Each of the classes `cl_N', `cl_R', `cl_RA', `cl_I', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operation: `TYPE signum (const TYPE& x)' Returns the sign of `x', in the same number format as `x'. This is defined as `x / abs(x)' if `x' is non-zero, and `x' if `x' is zero. If `x' is real, the value is either 0 or 1 or -1.  File: cln.info, Node: Elementary rational functions, Next: Elementary complex functions, Prev: Elementary functions, Up: Functions on numbers Elementary rational functions ============================= Each of the classes `cl_RA', `cl_I' defines the following operations: `cl_I numerator (const TYPE& x)' Returns the numerator of `x'. `cl_I denominator (const TYPE& x)' Returns the denominator of `x'. The numerator and denominator of a rational number are normalized in such a way that they have no factor in common and the denominator is positive.  File: cln.info, Node: Elementary complex functions, Next: Comparisons, Prev: Elementary rational functions, Up: Functions on numbers Elementary complex functions ============================ The class `cl_N' defines the following operation: `cl_N complex (const cl_R& a, const cl_R& b)' Returns the complex number `a+bi', that is, the complex number with real part `a' and imaginary part `b'. Each of the classes `cl_N', `cl_R' defines the following operations: `cl_R realpart (const TYPE& x)' Returns the real part of `x'. `cl_R imagpart (const TYPE& x)' Returns the imaginary part of `x'. `TYPE conjugate (const TYPE& x)' Returns the complex conjugate of `x'. We have the relations `x = complex(realpart(x), imagpart(x))' `conjugate(x) = complex(realpart(x), -imagpart(x))'  File: cln.info, Node: Comparisons, Next: Rounding functions, Prev: Elementary complex functions, Up: Functions on numbers Comparisons =========== Each of the classes `cl_N', `cl_R', `cl_RA', `cl_I', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operations: `bool operator == (const TYPE&, const TYPE&)' `bool operator != (const TYPE&, const TYPE&)' Comparison, as in C and C++. `uint32 equal_hashcode (const TYPE&)' Returns a 32-bit hash code that is the same for any two numbers which are the same according to `=='. This hash code depends on the number's value, not its type or precision. `cl_boolean zerop (const TYPE& x)' Compare against zero: `x == 0' Each of the classes `cl_R', `cl_RA', `cl_I', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operations: `cl_signean compare (const TYPE& x, const TYPE& y)' Compares `x' and `y'. Returns +1 if `x'>`y', -1 if `x'<`y', 0 if `x'=`y'. `bool operator <= (const TYPE&, const TYPE&)' `bool operator < (const TYPE&, const TYPE&)' `bool operator >= (const TYPE&, const TYPE&)' `bool operator > (const TYPE&, const TYPE&)' Comparison, as in C and C++. `cl_boolean minusp (const TYPE& x)' Compare against zero: `x < 0' `cl_boolean plusp (const TYPE& x)' Compare against zero: `x > 0' `TYPE max (const TYPE& x, const TYPE& y)' Return the maximum of `x' and `y'. `TYPE min (const TYPE& x, const TYPE& y)' Return the minimum of `x' and `y'. When a floating point number and a rational number are compared, the float is first converted to a rational number using the function `rational'. Since a floating point number actually represents an interval of real numbers, the result might be surprising. For example, `(cl_F)(cl_R)"1/3" == (cl_R)"1/3"' returns false because there is no floating point number whose value is exactly `1/3'.  File: cln.info, Node: Rounding functions, Next: Roots, Prev: Comparisons, Up: Functions on numbers Rounding functions ================== When a real number is to be converted to an integer, there is no "best" rounding. The desired rounding function depends on the application. The Common Lisp and ISO Lisp standards offer four rounding functions: `floor(x)' This is the largest integer <=`x'. `ceiling(x)' This is the smallest integer >=`x'. `truncate(x)' Among the integers between 0 and `x' (inclusive) the one nearest to `x'. `round(x)' The integer nearest to `x'. If `x' is exactly halfway between two integers, choose the even one. These functions have different advantages: `floor' and `ceiling' are translation invariant: `floor(x+n) = floor(x) + n' and `ceiling(x+n) = ceiling(x) + n' for every `x' and every integer `n'. On the other hand, `truncate' and `round' are symmetric: `truncate(-x) = -truncate(x)' and `round(-x) = -round(x)', and furthermore `round' is unbiased: on the "average", it rounds down exactly as often as it rounds up. The functions are related like this: `ceiling(m/n) = floor((m+n-1)/n) = floor((m-1)/n)+1' for rational numbers `m/n' (`m', `n' integers, `n'>0), and `truncate(x) = sign(x) * floor(abs(x))' Each of the classes `cl_R', `cl_RA', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operations: `cl_I floor1 (const TYPE& x)' Returns `floor(x)'. `cl_I ceiling1 (const TYPE& x)' Returns `ceiling(x)'. `cl_I truncate1 (const TYPE& x)' Returns `truncate(x)'. `cl_I round1 (const TYPE& x)' Returns `round(x)'. Each of the classes `cl_R', `cl_RA', `cl_I', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operations: `cl_I floor1 (const TYPE& x, const TYPE& y)' Returns `floor(x/y)'. `cl_I ceiling1 (const TYPE& x, const TYPE& y)' Returns `ceiling(x/y)'. `cl_I truncate1 (const TYPE& x, const TYPE& y)' Returns `truncate(x/y)'. `cl_I round1 (const TYPE& x, const TYPE& y)' Returns `round(x/y)'. These functions are called `floor1', ... here instead of `floor', ..., because on some systems, system dependent include files define `floor' and `ceiling' as macros. In many cases, one needs both the quotient and the remainder of a division. It is more efficient to compute both at the same time than to perform two divisions, one for quotient and the next one for the remainder. The following functions therefore return a structure containing both the quotient and the remainder. The suffix `2' indicates the number of "return values". The remainder is defined as follows: * for the computation of `quotient = floor(x)', `remainder = x - quotient', * for the computation of `quotient = floor(x,y)', `remainder = x - quotient*y', and similarly for the other three operations. Each of the classes `cl_R', `cl_RA', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operations: `struct TYPE_div_t { cl_I quotient; TYPE remainder; };' `TYPE_div_t floor2 (const TYPE& x)' `TYPE_div_t ceiling2 (const TYPE& x)' `TYPE_div_t truncate2 (const TYPE& x)' `TYPE_div_t round2 (const TYPE& x)' Each of the classes `cl_R', `cl_RA', `cl_I', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operations: `struct TYPE_div_t { cl_I quotient; TYPE remainder; };' `TYPE_div_t floor2 (const TYPE& x, const TYPE& y)' `TYPE_div_t ceiling2 (const TYPE& x, const TYPE& y)' `TYPE_div_t truncate2 (const TYPE& x, const TYPE& y)' `TYPE_div_t round2 (const TYPE& x, const TYPE& y)' Sometimes, one wants the quotient as a floating-point number (of the same format as the argument, if the argument is a float) instead of as an integer. The prefix `f' indicates this. Each of the classes `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operations: `TYPE ffloor (const TYPE& x)' `TYPE fceiling (const TYPE& x)' `TYPE ftruncate (const TYPE& x)' `TYPE fround (const TYPE& x)' and similarly for class `cl_R', but with return type `cl_F'. The class `cl_R' defines the following operations: `cl_F ffloor (const TYPE& x, const TYPE& y)' `cl_F fceiling (const TYPE& x, const TYPE& y)' `cl_F ftruncate (const TYPE& x, const TYPE& y)' `cl_F fround (const TYPE& x, const TYPE& y)' These functions also exist in versions which return both the quotient and the remainder. The suffix `2' indicates this. Each of the classes `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operations: `struct TYPE_fdiv_t { TYPE quotient; TYPE remainder; };' `TYPE_fdiv_t ffloor2 (const TYPE& x)' `TYPE_fdiv_t fceiling2 (const TYPE& x)' `TYPE_fdiv_t ftruncate2 (const TYPE& x)' `TYPE_fdiv_t fround2 (const TYPE& x)' and similarly for class `cl_R', but with quotient type `cl_F'. The class `cl_R' defines the following operations: `struct TYPE_fdiv_t { cl_F quotient; cl_R remainder; };' `TYPE_fdiv_t ffloor2 (const TYPE& x, const TYPE& y)' `TYPE_fdiv_t fceiling2 (const TYPE& x, const TYPE& y)' `TYPE_fdiv_t ftruncate2 (const TYPE& x, const TYPE& y)' `TYPE_fdiv_t fround2 (const TYPE& x, const TYPE& y)' Other applications need only the remainder of a division. The remainder of `floor' and `ffloor' is called `mod' (abbreviation of "modulo"). The remainder `truncate' and `ftruncate' is called `rem' (abbreviation of "remainder"). * `mod(x,y) = floor2(x,y).remainder = x - floor(x/y)*y' * `rem(x,y) = truncate2(x,y).remainder = x - truncate(x/y)*y' If `x' and `y' are both >= 0, `mod(x,y) = rem(x,y) >= 0'. In general, `mod(x,y)' has the sign of `y' or is zero, and `rem(x,y)' has the sign of `x' or is zero. The classes `cl_R', `cl_I' define the following operations: `TYPE mod (const TYPE& x, const TYPE& y)' `TYPE rem (const TYPE& x, const TYPE& y)'  File: cln.info, Node: Roots, Next: Transcendental functions, Prev: Rounding functions, Up: Functions on numbers Roots ===== Each of the classes `cl_R', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operation: `TYPE sqrt (const TYPE& x)' `x' must be >= 0. This function returns the square root of `x', normalized to be >= 0. If `x' is the square of a rational number, `sqrt(x)' will be a rational number, else it will return a floating-point approximation. The classes `cl_RA', `cl_I' define the following operation: `cl_boolean sqrtp (const TYPE& x, TYPE* root)' This tests whether `x' is a perfect square. If so, it returns true and the exact square root in `*root', else it returns false. Furthermore, for integers, similarly: `cl_boolean isqrt (const TYPE& x, TYPE* root)' `x' should be >= 0. This function sets `*root' to `floor(sqrt(x))' and returns the same value as `sqrtp': the boolean value `(expt(*root,2) == x)'. For `n'th roots, the classes `cl_RA', `cl_I' define the following operation: `cl_boolean rootp (const TYPE& x, const cl_I& n, TYPE* root)' `x' must be >= 0. `n' must be > 0. This tests whether `x' is an `n'th power of a rational number. If so, it returns true and the exact root in `*root', else it returns false. The only square root function which accepts negative numbers is the one for class `cl_N': `cl_N sqrt (const cl_N& z)' Returns the square root of `z', as defined by the formula `sqrt(z) = exp(log(z)/2)'. Conversion to a floating-point type or to a complex number are done if necessary. The range of the result is the right half plane `realpart(sqrt(z)) >= 0' including the positive imaginary axis and 0, but excluding the negative imaginary axis. The result is an exact number only if `z' is an exact number.  File: cln.info, Node: Transcendental functions, Next: Functions on integers, Prev: Roots, Up: Functions on numbers Transcendental functions ======================== The transcendental functions return an exact result if the argument is exact and the result is exact as well. Otherwise they must return inexact numbers even if the argument is exact. For example, `cos(0) = 1' returns the rational number `1'. * Menu: * Exponential and logarithmic functions:: * Trigonometric functions:: * Hyperbolic functions:: * Euler gamma:: * Riemann zeta::  File: cln.info, Node: Exponential and logarithmic functions, Next: Trigonometric functions, Prev: Transcendental functions, Up: Transcendental functions Exponential and logarithmic functions ------------------------------------- `cl_R exp (const cl_R& x)' `cl_N exp (const cl_N& x)' Returns the exponential function of `x'. This is `e^x' where `e' is the base of the natural logarithms. The range of the result is the entire complex plane excluding 0. `cl_R ln (const cl_R& x)' `x' must be > 0. Returns the (natural) logarithm of x. `cl_N log (const cl_N& x)' Returns the (natural) logarithm of x. If `x' is real and positive, this is `ln(x)'. In general, `log(x) = log(abs(x)) + i*phase(x)'. The range of the result is the strip in the complex plane `-pi < imagpart(log(x)) <= pi'. `cl_R phase (const cl_N& x)' Returns the angle part of `x' in its polar representation as a complex number. That is, `phase(x) = atan(realpart(x),imagpart(x))'. This is also the imaginary part of `log(x)'. The range of the result is the interval `-pi < phase(x) <= pi'. The result will be an exact number only if `zerop(x)' or if `x' is real and positive. `cl_R log (const cl_R& a, const cl_R& b)' `a' and `b' must be > 0. Returns the logarithm of `a' with respect to base `b'. `log(a,b) = ln(a)/ln(b)'. The result can be exact only if `a = 1' or if `a' and `b' are both rational. `cl_N log (const cl_N& a, const cl_N& b)' Returns the logarithm of `a' with respect to base `b'. `log(a,b) = log(a)/log(b)'. `cl_N expt (const cl_N& x, const cl_N& y)' Exponentiation: Returns `x^y = exp(y*log(x))'. The constant e = exp(1) = 2.71828... is returned by the following functions: `cl_F exp1 (cl_float_format_t f)' Returns e as a float of format `f'. `cl_F exp1 (const cl_F& y)' Returns e in the float format of `y'. `cl_F exp1 (void)' Returns e as a float of format `default_float_format'.  File: cln.info, Node: Trigonometric functions, Next: Hyperbolic functions, Prev: Exponential and logarithmic functions, Up: Transcendental functions Trigonometric functions ----------------------- `cl_R sin (const cl_R& x)' Returns `sin(x)'. The range of the result is the interval `-1 <= sin(x) <= 1'. `cl_N sin (const cl_N& z)' Returns `sin(z)'. The range of the result is the entire complex plane. `cl_R cos (const cl_R& x)' Returns `cos(x)'. The range of the result is the interval `-1 <= cos(x) <= 1'. `cl_N cos (const cl_N& x)' Returns `cos(z)'. The range of the result is the entire complex plane. `struct cos_sin_t { cl_R cos; cl_R sin; };' `cos_sin_t cos_sin (const cl_R& x)' Returns both `sin(x)' and `cos(x)'. This is more efficient than computing them separately. The relation `cos^2 + sin^2 = 1' will hold only approximately. `cl_R tan (const cl_R& x)' `cl_N tan (const cl_N& x)' Returns `tan(x) = sin(x)/cos(x)'. `cl_N cis (const cl_R& x)' `cl_N cis (const cl_N& x)' Returns `exp(i*x)'. The name `cis' means "cos + i sin", because `e^(i*x) = cos(x) + i*sin(x)'. `cl_N asin (const cl_N& z)' Returns `arcsin(z)'. This is defined as `arcsin(z) = log(iz+sqrt(1-z^2))/i' and satisfies `arcsin(-z) = -arcsin(z)'. The range of the result is the strip in the complex domain `-pi/2 <= realpart(arcsin(z)) <= pi/2', excluding the numbers with `realpart = -pi/2' and `imagpart < 0' and the numbers with `realpart = pi/2' and `imagpart > 0'. `cl_N acos (const cl_N& z)' Returns `arccos(z)'. This is defined as `arccos(z) = pi/2 - arcsin(z) = log(z+i*sqrt(1-z^2))/i' and satisfies `arccos(-z) = pi - arccos(z)'. The range of the result is the strip in the complex domain `0 <= realpart(arcsin(z)) <= pi', excluding the numbers with `realpart = 0' and `imagpart < 0' and the numbers with `realpart = pi' and `imagpart > 0'. `cl_R atan (const cl_R& x, const cl_R& y)' Returns the angle of the polar representation of the complex number `x+iy'. This is `atan(y/x)' if `x>0'. The range of the result is the interval `-pi < atan(x,y) <= pi'. The result will be an exact number only if `x > 0' and `y' is the exact `0'. WARNING: In Common Lisp, this function is called as `(atan y x)', with reversed order of arguments. `cl_R atan (const cl_R& x)' Returns `arctan(x)'. This is the same as `atan(1,x)'. The range of the result is the interval `-pi/2 < atan(x) < pi/2'. The result will be an exact number only if `x' is the exact `0'. `cl_N atan (const cl_N& z)' Returns `arctan(z)'. This is defined as `arctan(z) = (log(1+iz)-log(1-iz)) / 2i' and satisfies `arctan(-z) = -arctan(z)'. The range of the result is the strip in the complex domain `-pi/2 <= realpart(arctan(z)) <= pi/2', excluding the numbers with `realpart = -pi/2' and `imagpart >= 0' and the numbers with `realpart = pi/2' and `imagpart <= 0'. Archimedes' constant pi = 3.14... is returned by the following functions: `cl_F pi (cl_float_format_t f)' Returns pi as a float of format `f'. `cl_F pi (const cl_F& y)' Returns pi in the float format of `y'. `cl_F pi (void)' Returns pi as a float of format `default_float_format'.  File: cln.info, Node: Hyperbolic functions, Next: Euler gamma, Prev: Trigonometric functions, Up: Transcendental functions Hyperbolic functions -------------------- `cl_R sinh (const cl_R& x)' Returns `sinh(x)'. `cl_N sinh (const cl_N& z)' Returns `sinh(z)'. The range of the result is the entire complex plane. `cl_R cosh (const cl_R& x)' Returns `cosh(x)'. The range of the result is the interval `cosh(x) >= 1'. `cl_N cosh (const cl_N& z)' Returns `cosh(z)'. The range of the result is the entire complex plane. `struct cosh_sinh_t { cl_R cosh; cl_R sinh; };' `cosh_sinh_t cosh_sinh (const cl_R& x)' Returns both `sinh(x)' and `cosh(x)'. This is more efficient than computing them separately. The relation `cosh^2 - sinh^2 = 1' will hold only approximately. `cl_R tanh (const cl_R& x)' `cl_N tanh (const cl_N& x)' Returns `tanh(x) = sinh(x)/cosh(x)'. `cl_N asinh (const cl_N& z)' Returns `arsinh(z)'. This is defined as `arsinh(z) = log(z+sqrt(1+z^2))' and satisfies `arsinh(-z) = -arsinh(z)'. The range of the result is the strip in the complex domain `-pi/2 <= imagpart(arsinh(z)) <= pi/2', excluding the numbers with `imagpart = -pi/2' and `realpart > 0' and the numbers with `imagpart = pi/2' and `realpart < 0'. `cl_N acosh (const cl_N& z)' Returns `arcosh(z)'. This is defined as `arcosh(z) = 2*log(sqrt((z+1)/2)+sqrt((z-1)/2))'. The range of the result is the half-strip in the complex domain `-pi < imagpart(arcosh(z)) <= pi, realpart(arcosh(z)) >= 0', excluding the numbers with `realpart = 0' and `-pi < imagpart < 0'. `cl_N atanh (const cl_N& z)' Returns `artanh(z)'. This is defined as `artanh(z) = (log(1+z)-log(1-z)) / 2' and satisfies `artanh(-z) = -artanh(z)'. The range of the result is the strip in the complex domain `-pi/2 <= imagpart(artanh(z)) <= pi/2', excluding the numbers with `imagpart = -pi/2' and `realpart <= 0' and the numbers with `imagpart = pi/2' and `realpart >= 0'.  File: cln.info, Node: Euler gamma, Next: Riemann zeta, Prev: Hyperbolic functions, Up: Transcendental functions Euler gamma ----------- Euler's constant C = 0.577... is returned by the following functions: `cl_F eulerconst (cl_float_format_t f)' Returns Euler's constant as a float of format `f'. `cl_F eulerconst (const cl_F& y)' Returns Euler's constant in the float format of `y'. `cl_F eulerconst (void)' Returns Euler's constant as a float of format `default_float_format'. Catalan's constant G = 0.915... is returned by the following functions: `cl_F catalanconst (cl_float_format_t f)' Returns Catalan's constant as a float of format `f'. `cl_F catalanconst (const cl_F& y)' Returns Catalan's constant in the float format of `y'. `cl_F catalanconst (void)' Returns Catalan's constant as a float of format `default_float_format'.  File: cln.info, Node: Riemann zeta, Prev: Euler gamma, Up: Transcendental functions Riemann zeta ------------ Riemann's zeta function at an integral point `s>1' is returned by the following functions: `cl_F zeta (int s, cl_float_format_t f)' Returns Riemann's zeta function at `s' as a float of format `f'. `cl_F zeta (int s, const cl_F& y)' Returns Riemann's zeta function at `s' in the float format of `y'. `cl_F zeta (int s)' Returns Riemann's zeta function at `s' as a float of format `default_float_format'.  File: cln.info, Node: Functions on integers, Next: Functions on floating-point numbers, Prev: Transcendental functions, Up: Functions on numbers Functions on integers ===================== * Menu: * Logical functions:: * Number theoretic functions:: * Combinatorial functions::  File: cln.info, Node: Logical functions, Next: Number theoretic functions, Prev: Functions on integers, Up: Functions on integers Logical functions ----------------- Integers, when viewed as in two's complement notation, can be thought as infinite bit strings where the bits' values eventually are constant. For example, 17 = ......00010001 -6 = ......11111010 The logical operations view integers as such bit strings and operate on each of the bit positions in parallel. `cl_I lognot (const cl_I& x)' `cl_I operator ~ (const cl_I& x)' Logical not, like `~x' in C. This is the same as `-1-x'. `cl_I logand (const cl_I& x, const cl_I& y)' `cl_I operator & (const cl_I& x, const cl_I& y)' Logical and, like `x & y' in C. `cl_I logior (const cl_I& x, const cl_I& y)' `cl_I operator | (const cl_I& x, const cl_I& y)' Logical (inclusive) or, like `x | y' in C. `cl_I logxor (const cl_I& x, const cl_I& y)' `cl_I operator ^ (const cl_I& x, const cl_I& y)' Exclusive or, like `x ^ y' in C. `cl_I logeqv (const cl_I& x, const cl_I& y)' Bitwise equivalence, like `~(x ^ y)' in C. `cl_I lognand (const cl_I& x, const cl_I& y)' Bitwise not and, like `~(x & y)' in C. `cl_I lognor (const cl_I& x, const cl_I& y)' Bitwise not or, like `~(x | y)' in C. `cl_I logandc1 (const cl_I& x, const cl_I& y)' Logical and, complementing the first argument, like `~x & y' in C. `cl_I logandc2 (const cl_I& x, const cl_I& y)' Logical and, complementing the second argument, like `x & ~y' in C. `cl_I logorc1 (const cl_I& x, const cl_I& y)' Logical or, complementing the first argument, like `~x | y' in C. `cl_I logorc2 (const cl_I& x, const cl_I& y)' Logical or, complementing the second argument, like `x | ~y' in C. These operations are all available though the function `cl_I boole (cl_boole op, const cl_I& x, const cl_I& y)' where `op' must have one of the 16 values (each one stands for a function which combines two bits into one bit): `boole_clr', `boole_set', `boole_1', `boole_2', `boole_c1', `boole_c2', `boole_and', `boole_ior', `boole_xor', `boole_eqv', `boole_nand', `boole_nor', `boole_andc1', `boole_andc2', `boole_orc1', `boole_orc2'. Other functions that view integers as bit strings: `cl_boolean logtest (const cl_I& x, const cl_I& y)' Returns true if some bit is set in both `x' and `y', i.e. if `logand(x,y) != 0'. `cl_boolean logbitp (const cl_I& n, const cl_I& x)' Returns true if the `n'th bit (from the right) of `x' is set. Bit 0 is the least significant bit. `uintL logcount (const cl_I& x)' Returns the number of one bits in `x', if `x' >= 0, or the number of zero bits in `x', if `x' < 0. The following functions operate on intervals of bits in integers. The type struct cl_byte { uintL size; uintL position; }; represents the bit interval containing the bits `position'...`position+size-1' of an integer. The constructor `cl_byte(size,position)' constructs a `cl_byte'. `cl_I ldb (const cl_I& n, const cl_byte& b)' extracts the bits of `n' described by the bit interval `b' and returns them as a nonnegative integer with `b.size' bits. `cl_boolean ldb_test (const cl_I& n, const cl_byte& b)' Returns true if some bit described by the bit interval `b' is set in `n'. `cl_I dpb (const cl_I& newbyte, const cl_I& n, const cl_byte& b)' Returns `n', with the bits described by the bit interval `b' replaced by `newbyte'. Only the lowest `b.size' bits of `newbyte' are relevant. The functions `ldb' and `dpb' implicitly shift. The following functions are their counterparts without shifting: `cl_I mask_field (const cl_I& n, const cl_byte& b)' returns an integer with the bits described by the bit interval `b' copied from the corresponding bits in `n', the other bits zero. `cl_I deposit_field (const cl_I& newbyte, const cl_I& n, const cl_byte& b)' returns an integer where the bits described by the bit interval `b' come from `newbyte' and the other bits come from `n'. The following relations hold: `ldb (n, b) = mask_field(n, b) >> b.position', `dpb (newbyte, n, b) = deposit_field (newbyte << b.position, n, b)', `deposit_field(newbyte,n,b) = n ^ mask_field(n,b) ^ mask_field(new_byte,b)'. The following operations on integers as bit strings are efficient shortcuts for common arithmetic operations: `cl_boolean oddp (const cl_I& x)' Returns true if the least significant bit of `x' is 1. Equivalent to `mod(x,2) != 0'. `cl_boolean evenp (const cl_I& x)' Returns true if the least significant bit of `x' is 0. Equivalent to `mod(x,2) == 0'. `cl_I operator << (const cl_I& x, const cl_I& n)' Shifts `x' by `n' bits to the left. `n' should be >=0. Equivalent to `x * expt(2,n)'. `cl_I operator >> (const cl_I& x, const cl_I& n)' Shifts `x' by `n' bits to the right. `n' should be >=0. Bits shifted out to the right are thrown away. Equivalent to `floor(x / expt(2,n))'. `cl_I ash (const cl_I& x, const cl_I& y)' Shifts `x' by `y' bits to the left (if `y'>=0) or by `-y' bits to the right (if `y'<=0). In other words, this returns `floor(x * expt(2,y))'. `uintL integer_length (const cl_I& x)' Returns the number of bits (excluding the sign bit) needed to represent `x' in two's complement notation. This is the smallest n >= 0 such that -2^n <= x < 2^n. If x > 0, this is the unique n > 0 such that 2^(n-1) <= x < 2^n. `uintL ord2 (const cl_I& x)' `x' must be non-zero. This function returns the number of 0 bits at the right of `x' in two's complement notation. This is the largest n >= 0 such that 2^n divides `x'. `uintL power2p (const cl_I& x)' `x' must be > 0. This function checks whether `x' is a power of 2. If `x' = 2^(n-1), it returns n. Else it returns 0. (See also the function `logp'.)  File: cln.info, Node: Number theoretic functions, Next: Combinatorial functions, Prev: Logical functions, Up: Functions on integers Number theoretic functions -------------------------- `uint32 gcd (uint32 a, uint32 b)' `cl_I gcd (const cl_I& a, const cl_I& b)' This function returns the greatest common divisor of `a' and `b', normalized to be >= 0. `cl_I xgcd (const cl_I& a, const cl_I& b, cl_I* u, cl_I* v)' This function ("extended gcd") returns the greatest common divisor `g' of `a' and `b' and at the same time the representation of `g' as an integral linear combination of `a' and `b': `u' and `v' with `u*a+v*b = g', `g' >= 0. `u' and `v' will be normalized to be of smallest possible absolute value, in the following sense: If `a' and `b' are non-zero, and `abs(a) != abs(b)', `u' and `v' will satisfy the inequalities `abs(u) <= abs(b)/(2*g)', `abs(v) <= abs(a)/(2*g)'. `cl_I lcm (const cl_I& a, const cl_I& b)' This function returns the least common multiple of `a' and `b', normalized to be >= 0. `cl_boolean logp (const cl_I& a, const cl_I& b, cl_RA* l)' `cl_boolean logp (const cl_RA& a, const cl_RA& b, cl_RA* l)' `a' must be > 0. `b' must be >0 and != 1. If log(a,b) is rational number, this function returns true and sets *l = log(a,b), else it returns false.  File: cln.info, Node: Combinatorial functions, Prev: Number theoretic functions, Up: Functions on integers Combinatorial functions ----------------------- `cl_I factorial (uintL n)' `n' must be a small integer >= 0. This function returns the factorial `n'! = `1*2*...*n'. `cl_I doublefactorial (uintL n)' `n' must be a small integer >= 0. This function returns the doublefactorial `n'!! = `1*3*...*n' or `n'!! = `2*4*...*n', respectively. `cl_I binomial (uintL n, uintL k)' `n' and `k' must be small integers >= 0. This function returns the binomial coefficient (`n' choose `k') = `n'! / `k'! `(n-k)'! for 0 <= k <= n, 0 else.  File: cln.info, Node: Functions on floating-point numbers, Next: Conversion functions, Prev: Functions on integers, Up: Functions on numbers Functions on floating-point numbers =================================== Recall that a floating-point number consists of a sign `s', an exponent `e' and a mantissa `m'. The value of the number is `(-1)^s * 2^e * m'. Each of the classes `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines the following operations. `TYPE scale_float (const TYPE& x, sintL delta)' `TYPE scale_float (const TYPE& x, const cl_I& delta)' Returns `x*2^delta'. This is more efficient than an explicit multiplication because it copies `x' and modifies the exponent. The following functions provide an abstract interface to the underlying representation of floating-point numbers. `sintL float_exponent (const TYPE& x)' Returns the exponent `e' of `x'. For `x = 0.0', this is 0. For `x' non-zero, this is the unique integer with `2^(e-1) <= abs(x) < 2^e'. `sintL float_radix (const TYPE& x)' Returns the base of the floating-point representation. This is always `2'. `TYPE float_sign (const TYPE& x)' Returns the sign `s' of `x' as a float. The value is 1 for `x' >= 0, -1 for `x' < 0. `uintL float_digits (const TYPE& x)' Returns the number of mantissa bits in the floating-point representation of `x', including the hidden bit. The value only depends on the type of `x', not on its value. `uintL float_precision (const TYPE& x)' Returns the number of significant mantissa bits in the floating-point representation of `x'. Since denormalized numbers are not supported, this is the same as `float_digits(x)' if `x' is non-zero, and 0 if `x' = 0. The complete internal representation of a float is encoded in the type `decoded_float' (or `decoded_sfloat', `decoded_ffloat', `decoded_dfloat', `decoded_lfloat', respectively), defined by struct decoded_TYPEfloat { TYPE mantissa; cl_I exponent; TYPE sign; }; and returned by the function `decoded_TYPEfloat decode_float (const TYPE& x)' For `x' non-zero, this returns `(-1)^s', `e', `m' with `x = (-1)^s * 2^e * m' and `0.5 <= m < 1.0'. For `x' = 0, it returns `(-1)^s'=1, `e'=0, `m'=0. `e' is the same as returned by the function `float_exponent'. A complete decoding in terms of integers is provided as type struct cl_idecoded_float { cl_I mantissa; cl_I exponent; cl_I sign; }; by the following function: `cl_idecoded_float integer_decode_float (const TYPE& x)' For `x' non-zero, this returns `(-1)^s', `e', `m' with `x = (-1)^s * 2^e * m' and `m' an integer with `float_digits(x)' bits. For `x' = 0, it returns `(-1)^s'=1, `e'=0, `m'=0. WARNING: The exponent `e' is not the same as the one returned by the functions `decode_float' and `float_exponent'. Some other function, implemented only for class `cl_F': `cl_F float_sign (const cl_F& x, const cl_F& y)' This returns a floating point number whose precision and absolute value is that of `y' and whose sign is that of `x'. If `x' is zero, it is treated as positive. Same for `y'.  File: cln.info, Node: Conversion functions, Next: Random number generators, Prev: Functions on floating-point numbers, Up: Functions on numbers Conversion functions ==================== * Menu: * Conversion to floating-point numbers:: * Conversion to rational numbers::  File: cln.info, Node: Conversion to floating-point numbers, Next: Conversion to rational numbers, Prev: Conversion functions, Up: Conversion functions Conversion to floating-point numbers ------------------------------------ The type `cl_float_format_t' describes a floating-point format. `cl_float_format_t cl_float_format (uintL n)' Returns the smallest float format which guarantees at least `n' decimal digits in the mantissa (after the decimal point). `cl_float_format_t cl_float_format (const cl_F& x)' Returns the floating point format of `x'. `cl_float_format_t default_float_format' Global variable: the default float format used when converting rational numbers to floats. To convert a real number to a float, each of the types `cl_R', `cl_F', `cl_I', `cl_RA', `int', `unsigned int', `float', `double' defines the following operations: `cl_F cl_float (const TYPE&x, cl_float_format_t f)' Returns `x' as a float of format `f'. `cl_F cl_float (const TYPE&x, const cl_F& y)' Returns `x' in the float format of `y'. `cl_F cl_float (const TYPE&x)' Returns `x' as a float of format `default_float_format' if it is an exact number, or `x' itself if it is already a float. Of course, converting a number to a float can lose precision. Every floating-point format has some characteristic numbers: `cl_F most_positive_float (cl_float_format_t f)' Returns the largest (most positive) floating point number in float format `f'. `cl_F most_negative_float (cl_float_format_t f)' Returns the smallest (most negative) floating point number in float format `f'. `cl_F least_positive_float (cl_float_format_t f)' Returns the least positive floating point number (i.e. > 0 but closest to 0) in float format `f'. `cl_F least_negative_float (cl_float_format_t f)' Returns the least negative floating point number (i.e. < 0 but closest to 0) in float format `f'. `cl_F float_epsilon (cl_float_format_t f)' Returns the smallest floating point number e > 0 such that `1+e != 1'. `cl_F float_negative_epsilon (cl_float_format_t f)' Returns the smallest floating point number e > 0 such that `1-e != 1'.  File: cln.info, Node: Conversion to rational numbers, Prev: Conversion to floating-point numbers, Up: Conversion functions Conversion to rational numbers ------------------------------ Each of the classes `cl_R', `cl_RA', `cl_F' defines the following operation: `cl_RA rational (const TYPE& x)' Returns the value of `x' as an exact number. If `x' is already an exact number, this is `x'. If `x' is a floating-point number, the value is a rational number whose denominator is a power of 2. In order to convert back, say, `(cl_F)(cl_R)"1/3"' to `1/3', there is the function `cl_RA rationalize (const cl_R& x)' If `x' is a floating-point number, it actually represents an interval of real numbers, and this function returns the rational number with smallest denominator (and smallest numerator, in magnitude) which lies in this interval. If `x' is already an exact number, this function returns `x'. If `x' is any float, one has `cl_float(rational(x),x) = x' `cl_float(rationalize(x),x) = x'  File: cln.info, Node: Random number generators, Next: Obfuscating operators, Prev: Conversion functions, Up: Functions on numbers Random number generators ======================== A random generator is a machine which produces (pseudo-)random numbers. The include file `' defines a class `random_state' which contains the state of a random generator. If you make a copy of the random number generator, the original one and the copy will produce the same sequence of random numbers. The following functions return (pseudo-)random numbers in different formats. Calling one of these modifies the state of the random number generator in a complicated but deterministic way. The global variable random_state default_random_state contains a default random number generator. It is used when the functions below are called without `random_state' argument. `uint32 random32 (random_state& randomstate)' `uint32 random32 ()' Returns a random unsigned 32-bit number. All bits are equally random. `cl_I random_I (random_state& randomstate, const cl_I& n)' `cl_I random_I (const cl_I& n)' `n' must be an integer > 0. This function returns a random integer `x' in the range `0 <= x < n'. `cl_F random_F (random_state& randomstate, const cl_F& n)' `cl_F random_F (const cl_F& n)' `n' must be a float > 0. This function returns a random floating-point number of the same format as `n' in the range `0 <= x < n'. `cl_R random_R (random_state& randomstate, const cl_R& n)' `cl_R random_R (const cl_R& n)' Behaves like `random_I' if `n' is an integer and like `random_F' if `n' is a float.  File: cln.info, Node: Obfuscating operators, Prev: Random number generators, Up: Functions on numbers Obfuscating operators ===================== The modifying C/C++ operators `+=', `-=', `*=', `/=', `&=', `|=', `^=', `<<=', `>>=' are not available by default because their use tends to make programs unreadable. It is trivial to get away without them. However, if you feel that you absolutely need these operators to get happy, then add #define WANT_OBFUSCATING_OPERATORS to the beginning of your source files, before the inclusion of any CLN include files. This flag will enable the following operators: For the classes `cl_N', `cl_R', `cl_RA', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF': `TYPE& operator += (TYPE&, const TYPE&)' `TYPE& operator -= (TYPE&, const TYPE&)' `TYPE& operator *= (TYPE&, const TYPE&)' `TYPE& operator /= (TYPE&, const TYPE&)' For the class `cl_I': `TYPE& operator += (TYPE&, const TYPE&)' `TYPE& operator -= (TYPE&, const TYPE&)' `TYPE& operator *= (TYPE&, const TYPE&)' `TYPE& operator &= (TYPE&, const TYPE&)' `TYPE& operator |= (TYPE&, const TYPE&)' `TYPE& operator ^= (TYPE&, const TYPE&)' `TYPE& operator <<= (TYPE&, const TYPE&)' `TYPE& operator >>= (TYPE&, const TYPE&)' For the classes `cl_N', `cl_R', `cl_RA', `cl_I', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF': `TYPE& operator ++ (TYPE& x)' The prefix operator `++x'. `void operator ++ (TYPE& x, int)' The postfix operator `x++'. `TYPE& operator -- (TYPE& x)' The prefix operator `--x'. `void operator -- (TYPE& x, int)' The postfix operator `x--'. Note that by using these obfuscating operators, you wouldn't gain efficiency: In CLN `x += y;' is exactly the same as `x = x+y;', not more efficient.  File: cln.info, Node: Input/Output, Next: Rings, Prev: Functions on numbers, Up: Top Input/Output ************ * Menu: * Internal and printed representation:: * Input functions:: * Output functions::  File: cln.info, Node: Internal and printed representation, Next: Input functions, Prev: Input/Output, Up: Input/Output Internal and printed representation =================================== All computations deal with the internal representations of the numbers. Every number has an external representation as a sequence of ASCII characters. Several external representations may denote the same number, for example, "20.0" and "20.000". Converting an internal to an external representation is called "printing", converting an external to an internal representation is called "reading". In CLN, it is always true that conversion of an internal to an external representation and then back to an internal representation will yield the same internal representation. Symbolically: `read(print(x)) == x'. This is called "print-read consistency". Different types of numbers have different external representations (case is insignificant): Integers External representation: SIGN{DIGIT}+. The reader also accepts the Common Lisp syntaxes SIGN{DIGIT}+`.' with a trailing dot for decimal integers and the `#NR', `#b', `#o', `#x' prefixes. Rational numbers External representation: SIGN{DIGIT}+`/'{DIGIT}+. The `#NR', `#b', `#o', `#x' prefixes are allowed here as well. Floating-point numbers External representation: SIGN{DIGIT}*EXPONENT or SIGN{DIGIT}*`.'{DIGIT}*EXPONENT or SIGN{DIGIT}*`.'{DIGIT}+. A precision specifier of the form _PREC may be appended. There must be at least one digit in the non-exponent part. The exponent has the syntax EXPMARKER EXPSIGN {DIGIT}+. The exponent marker is `s' for short-floats, `f' for single-floats, `d' for double-floats, `L' for long-floats, or `e', which denotes a default float format. The precision specifying suffix has the syntax _PREC where PREC denotes the number of valid mantissa digits (in decimal, excluding leading zeroes), cf. also function `cl_float_format'. Complex numbers External representation: In algebraic notation: `REALPART+IMAGPARTi'. Of course, if IMAGPART is negative, its printed representation begins with a `-', and the `+' between REALPART and IMAGPART may be omitted. Note that this notation cannot be used when the IMAGPART is rational and the rational number's base is >18, because the `i' is then read as a digit. In Common Lisp notation: `#C(REALPART IMAGPART)'.  File: cln.info, Node: Input functions, Next: Output functions, Prev: Internal and printed representation, Up: Input/Output Input functions =============== Including `' defines a type `cl_istream', which is the type of the first argument to all input functions. `cl_istream' is the same as `std::istream&'. The variable `cl_istream stdin' contains the standard input stream. These are the simple input functions: `int freadchar (cl_istream stream)' Reads a character from `stream'. Returns `cl_EOF' (not a `char'!) if the end of stream was encountered or an error occurred. `int funreadchar (cl_istream stream, int c)' Puts back `c' onto `stream'. `c' must be the result of the last `freadchar' operation on `stream'. Each of the classes `cl_N', `cl_R', `cl_RA', `cl_I', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines, in `', the following input function: `cl_istream operator>> (cl_istream stream, TYPE& result)' Reads a number from `stream' and stores it in the `result'. The most flexible input functions, defined in `', are the following: `cl_N read_complex (cl_istream stream, const cl_read_flags& flags)' `cl_R read_real (cl_istream stream, const cl_read_flags& flags)' `cl_F read_float (cl_istream stream, const cl_read_flags& flags)' `cl_RA read_rational (cl_istream stream, const cl_read_flags& flags)' `cl_I read_integer (cl_istream stream, const cl_read_flags& flags)' Reads a number from `stream'. The `flags' are parameters which affect the input syntax. Whitespace before the number is silently skipped. `cl_N read_complex (const cl_read_flags& flags, const char * string, const char * string_limit, const char * * end_of_parse)' `cl_R read_real (const cl_read_flags& flags, const char * string, const char * string_limit, const char * * end_of_parse)' `cl_F read_float (const cl_read_flags& flags, const char * string, const char * string_limit, const char * * end_of_parse)' `cl_RA read_rational (const cl_read_flags& flags, const char * string, const char * string_limit, const char * * end_of_parse)' `cl_I read_integer (const cl_read_flags& flags, const char * string, const char * string_limit, const char * * end_of_parse)' Reads a number from a string in memory. The `flags' are parameters which affect the input syntax. The string starts at `string' and ends at `string_limit' (exclusive limit). `string_limit' may also be `NULL', denoting the entire string, i.e. equivalent to `string_limit = string + strlen(string)'. If `end_of_parse' is `NULL', the string in memory must contain exactly one number and nothing more, else a fatal error will be signalled. If `end_of_parse' is not `NULL', `*end_of_parse' will be assigned a pointer past the last parsed character (i.e. `string_limit' if nothing came after the number). Whitespace is not allowed. The structure `cl_read_flags' contains the following fields: `cl_read_syntax_t syntax' The possible results of the read operation. Possible values are `syntax_number', `syntax_real', `syntax_rational', `syntax_integer', `syntax_float', `syntax_sfloat', `syntax_ffloat', `syntax_dfloat', `syntax_lfloat'. `cl_read_lsyntax_t lsyntax' Specifies the language-dependent syntax variant for the read operation. Possible values are `lsyntax_standard' accept standard algebraic notation only, no complex numbers, `lsyntax_algebraic' accept the algebraic notation `X+Yi' for complex numbers, `lsyntax_commonlisp' accept the `#b', `#o', `#x' syntaxes for binary, octal, hexadecimal numbers, `#BASER' for rational numbers in a given base, `#c(REALPART IMAGPART)' for complex numbers, `lsyntax_all' accept all of these extensions. `unsigned int rational_base' The base in which rational numbers are read. `cl_float_format_t float_flags.default_float_format' The float format used when reading floats with exponent marker `e'. `cl_float_format_t float_flags.default_lfloat_format' The float format used when reading floats with exponent marker `l'. `cl_boolean float_flags.mantissa_dependent_float_format' When this flag is true, floats specified with more digits than corresponding to the exponent marker they contain, but without _NNN suffix, will get a precision corresponding to their number of significant digits.  File: cln.info, Node: Output functions, Prev: Input functions, Up: Input/Output Output functions ================ Including `' defines a type `cl_ostream', which is the type of the first argument to all output functions. `cl_ostream' is the same as `std::ostream&'. The variable `cl_ostream stdout' contains the standard output stream. The variable `cl_ostream stderr' contains the standard error output stream. These are the simple output functions: `void fprintchar (cl_ostream stream, char c)' Prints the character `x' literally on the `stream'. `void fprint (cl_ostream stream, const char * string)' Prints the `string' literally on the `stream'. `void fprintdecimal (cl_ostream stream, int x)' `void fprintdecimal (cl_ostream stream, const cl_I& x)' Prints the integer `x' in decimal on the `stream'. `void fprintbinary (cl_ostream stream, const cl_I& x)' Prints the integer `x' in binary (base 2, without prefix) on the `stream'. `void fprintoctal (cl_ostream stream, const cl_I& x)' Prints the integer `x' in octal (base 8, without prefix) on the `stream'. `void fprinthexadecimal (cl_ostream stream, const cl_I& x)' Prints the integer `x' in hexadecimal (base 16, without prefix) on the `stream'. Each of the classes `cl_N', `cl_R', `cl_RA', `cl_I', `cl_F', `cl_SF', `cl_FF', `cl_DF', `cl_LF' defines, in `', the following output functions: `void fprint (cl_ostream stream, const TYPE& x)' `cl_ostream operator<< (cl_ostream stream, const TYPE& x)' Prints the number `x' on the `stream'. The output may depend on the global printer settings in the variable `default_print_flags'. The `ostream' flags and settings (flags, width and locale) are ignored. The most flexible output function, defined in `', are the following: void print_complex (cl_ostream stream, const cl_print_flags& flags, const cl_N& z); void print_real (cl_ostream stream, const cl_print_flags& flags, const cl_R& z); void print_float (cl_ostream stream, const cl_print_flags& flags, const cl_F& z); void print_rational (cl_ostream stream, const cl_print_flags& flags, const cl_RA& z); void print_integer (cl_ostream stream, const cl_print_flags& flags, const cl_I& z); Prints the number `x' on the `stream'. The `flags' are parameters which affect the output. The structure type `cl_print_flags' contains the following fields: `unsigned int rational_base' The base in which rational numbers are printed. Default is `10'. `cl_boolean rational_readably' If this flag is true, rational numbers are printed with radix specifiers in Common Lisp syntax (`#NR' or `#b' or `#o' or `#x' prefixes, trailing dot). Default is false. `cl_boolean float_readably' If this flag is true, type specific exponent markers have precedence over 'E'. Default is false. `cl_float_format_t default_float_format' Floating point numbers of this format will be printed using the 'E' exponent marker. Default is `cl_float_format_ffloat'. `cl_boolean complex_readably' If this flag is true, complex numbers will be printed using the Common Lisp syntax `#C(REALPART IMAGPART)'. Default is false. `cl_string univpoly_varname' Univariate polynomials with no explicit indeterminate name will be printed using this variable name. Default is `"x"'. The global variable `default_print_flags' contains the default values, used by the function `fprint'.  File: cln.info, Node: Rings, Next: Modular integers, Prev: Input/Output, Up: Top Rings ***** CLN has a class of abstract rings. Ring cl_ring Rings can be compared for equality: `bool operator== (const cl_ring&, const cl_ring&)' `bool operator!= (const cl_ring&, const cl_ring&)' These compare two rings for equality. Given a ring `R', the following members can be used. `void R->fprint (cl_ostream stream, const cl_ring_element& x)' `cl_boolean R->equal (const cl_ring_element& x, const cl_ring_element& y)' `cl_ring_element R->zero ()' `cl_boolean R->zerop (const cl_ring_element& x)' `cl_ring_element R->plus (const cl_ring_element& x, const cl_ring_element& y)' `cl_ring_element R->minus (const cl_ring_element& x, const cl_ring_element& y)' `cl_ring_element R->uminus (const cl_ring_element& x)' `cl_ring_element R->one ()' `cl_ring_element R->canonhom (const cl_I& x)' `cl_ring_element R->mul (const cl_ring_element& x, const cl_ring_element& y)' `cl_ring_element R->square (const cl_ring_element& x)' `cl_ring_element R->expt_pos (const cl_ring_element& x, const cl_I& y)' The following rings are built-in. `cl_null_ring cl_0_ring' The null ring, containing only zero. `cl_complex_ring cl_C_ring' The ring of complex numbers. This corresponds to the type `cl_N'. `cl_real_ring cl_R_ring' The ring of real numbers. This corresponds to the type `cl_R'. `cl_rational_ring cl_RA_ring' The ring of rational numbers. This corresponds to the type `cl_RA'. `cl_integer_ring cl_I_ring' The ring of integers. This corresponds to the type `cl_I'. Type tests can be performed for any of `cl_C_ring', `cl_R_ring', `cl_RA_ring', `cl_I_ring': `cl_boolean instanceof (const cl_number& x, const cl_number_ring& R)' Tests whether the given number is an element of the number ring R.  File: cln.info, Node: Modular integers, Next: Symbolic data types, Prev: Rings, Up: Top Modular integers **************** * Menu: * Modular integer rings:: * Functions on modular integers::  File: cln.info, Node: Modular integer rings, Next: Functions on modular integers, Prev: Modular integers, Up: Modular integers Modular integer rings ===================== CLN implements modular integers, i.e. integers modulo a fixed integer N. The modulus is explicitly part of every modular integer. CLN doesn't allow you to (accidentally) mix elements of different modular rings, e.g. `(3 mod 4) + (2 mod 5)' will result in a runtime error. (Ideally one would imagine a generic data type `cl_MI(N)', but C++ doesn't have generic types. So one has to live with runtime checks.) The class of modular integer rings is Ring cl_ring | | Modular integer ring cl_modint_ring and the class of all modular integers (elements of modular integer rings) is Modular integer cl_MI Modular integer rings are constructed using the function `cl_modint_ring find_modint_ring (const cl_I& N)' This function returns the modular ring `Z/NZ'. It takes care of finding out about special cases of `N', like powers of two and odd numbers for which Montgomery multiplication will be a win, and precomputes any necessary auxiliary data for computing modulo `N'. There is a cache table of rings, indexed by `N' (or, more precisely, by `abs(N)'). This ensures that the precomputation costs are reduced to a minimum. Modular integer rings can be compared for equality: `bool operator== (const cl_modint_ring&, const cl_modint_ring&)' `bool operator!= (const cl_modint_ring&, const cl_modint_ring&)' These compare two modular integer rings for equality. Two different calls to `find_modint_ring' with the same argument necessarily return the same ring because it is memoized in the cache table.  File: cln.info, Node: Functions on modular integers, Prev: Modular integer rings, Up: Modular integers Functions on modular integers ============================= Given a modular integer ring `R', the following members can be used. `cl_I R->modulus' This is the ring's modulus, normalized to be nonnegative: `abs(N)'. `cl_MI R->zero()' This returns `0 mod N'. `cl_MI R->one()' This returns `1 mod N'. `cl_MI R->canonhom (const cl_I& x)' This returns `x mod N'. `cl_I R->retract (const cl_MI& x)' This is a partial inverse function to `R->canonhom'. It returns the standard representative (`>=0', `random(random_state& randomstate)' `cl_MI R->random()' This returns a random integer modulo `N'. The following operations are defined on modular integers. `cl_modint_ring x.ring ()' Returns the ring to which the modular integer `x' belongs. `cl_MI operator+ (const cl_MI&, const cl_MI&)' Returns the sum of two modular integers. One of the arguments may also be a plain integer. `cl_MI operator- (const cl_MI&, const cl_MI&)' Returns the difference of two modular integers. One of the arguments may also be a plain integer. `cl_MI operator- (const cl_MI&)' Returns the negative of a modular integer. `cl_MI operator* (const cl_MI&, const cl_MI&)' Returns the product of two modular integers. One of the arguments may also be a plain integer. `cl_MI square (const cl_MI&)' Returns the square of a modular integer. `cl_MI recip (const cl_MI& x)' Returns the reciprocal `x^-1' of a modular integer `x'. `x' must be coprime to the modulus, otherwise an error message is issued. `cl_MI div (const cl_MI& x, const cl_MI& y)' Returns the quotient `x*y^-1' of two modular integers `x', `y'. `y' must be coprime to the modulus, otherwise an error message is issued. `cl_MI expt_pos (const cl_MI& x, const cl_I& y)' `y' must be > 0. Returns `x^y'. `cl_MI expt (const cl_MI& x, const cl_I& y)' Returns `x^y'. If `y' is negative, `x' must be coprime to the modulus, else an error message is issued. `cl_MI operator<< (const cl_MI& x, const cl_I& y)' Returns `x*2^y'. `cl_MI operator>> (const cl_MI& x, const cl_I& y)' Returns `x*2^-y'. When `y' is positive, the modulus must be odd, or an error message is issued. `bool operator== (const cl_MI&, const cl_MI&)' `bool operator!= (const cl_MI&, const cl_MI&)' Compares two modular integers, belonging to the same modular integer ring, for equality. `cl_boolean zerop (const cl_MI& x)' Returns true if `x' is `0 mod N'. The following output functions are defined (see also the chapter on input/output). `void fprint (cl_ostream stream, const cl_MI& x)' `cl_ostream operator<< (cl_ostream stream, const cl_MI& x)' Prints the modular integer `x' on the `stream'. The output may depend on the global printer settings in the variable `default_print_flags'.  File: cln.info, Node: Symbolic data types, Next: Univariate polynomials, Prev: Modular integers, Up: Top Symbolic data types ******************* CLN implements two symbolic (non-numeric) data types: strings and symbols. * Menu: * Strings:: * Symbols::  File: cln.info, Node: Strings, Next: Symbols, Prev: Symbolic data types, Up: Symbolic data types Strings ======= The class String cl_string implements immutable strings. Strings are constructed through the following constructors: `cl_string (const char * s)' Returns an immutable copy of the (zero-terminated) C string `s'. `cl_string (const char * ptr, unsigned long len)' Returns an immutable copy of the `len' characters at `ptr[0]', ..., `ptr[len-1]'. NUL characters are allowed. The following functions are available on strings: `operator =' Assignment from `cl_string' and `const char *'. `s.length()' `strlen(s)' Returns the length of the string `s'. `s[i]' Returns the `i'th character of the string `s'. `i' must be in the range `0 <= i < s.length()'. `bool equal (const cl_string& s1, const cl_string& s2)' Compares two strings for equality. One of the arguments may also be a plain `const char *'.  File: cln.info, Node: Symbols, Prev: Strings, Up: Symbolic data types Symbols ======= Symbols are uniquified strings: all symbols with the same name are shared. This means that comparison of two symbols is fast (effectively just a pointer comparison), whereas comparison of two strings must in the worst case walk both strings until their end. Symbols are used, for example, as tags for properties, as names of variables in polynomial rings, etc. Symbols are constructed through the following constructor: `cl_symbol (const cl_string& s)' Looks up or creates a new symbol with a given name. The following operations are available on symbols: `cl_string (const cl_symbol& sym)' Conversion to `cl_string': Returns the string which names the symbol `sym'. `bool equal (const cl_symbol& sym1, const cl_symbol& sym2)' Compares two symbols for equality. This is very fast.  File: cln.info, Node: Univariate polynomials, Next: Internals, Prev: Symbolic data types, Up: Top Univariate polynomials ********************** * Menu: * Univariate polynomial rings:: * Functions on univariate polynomials:: * Special polynomials::  File: cln.info, Node: Univariate polynomial rings, Next: Functions on univariate polynomials, Prev: Univariate polynomials, Up: Univariate polynomials Univariate polynomial rings =========================== CLN implements univariate polynomials (polynomials in one variable) over an arbitrary ring. The indeterminate variable may be either unnamed (and will be printed according to `default_print_flags.univpoly_varname', which defaults to `x') or carry a given name. The base ring and the indeterminate are explicitly part of every polynomial. CLN doesn't allow you to (accidentally) mix elements of different polynomial rings, e.g. `(a^2+1) * (b^3-1)' will result in a runtime error. (Ideally this should return a multivariate polynomial, but they are not yet implemented in CLN.) The classes of univariate polynomial rings are Ring cl_ring | | Univariate polynomial ring cl_univpoly_ring | +----------------+-------------------+ | | | Complex polynomial ring | Modular integer polynomial ring cl_univpoly_complex_ring | cl_univpoly_modint_ring | | +----------------+ | | Real polynomial ring | cl_univpoly_real_ring | | | +----------------+ | | Rational polynomial ring | cl_univpoly_rational_ring | | | +----------------+ | Integer polynomial ring cl_univpoly_integer_ring and the corresponding classes of univariate polynomials are Univariate polynomial cl_UP | +----------------+-------------------+ | | | Complex polynomial | Modular integer polynomial cl_UP_N | cl_UP_MI | | +----------------+ | | Real polynomial | cl_UP_R | | | +----------------+ | | Rational polynomial | cl_UP_RA | | | +----------------+ | Integer polynomial cl_UP_I Univariate polynomial rings are constructed using the functions `cl_univpoly_ring find_univpoly_ring (const cl_ring& R)' `cl_univpoly_ring find_univpoly_ring (const cl_ring& R, const cl_symbol& varname)' This function returns the polynomial ring `R[X]', unnamed or named. `R' may be an arbitrary ring. This function takes care of finding out about special cases of `R', such as the rings of complex numbers, real numbers, rational numbers, integers, or modular integer rings. There is a cache table of rings, indexed by `R' and `varname'. This ensures that two calls of this function with the same arguments will return the same polynomial ring. `cl_univpoly_complex_ring find_univpoly_ring (const cl_complex_ring& R)' `cl_univpoly_complex_ring find_univpoly_ring (const cl_complex_ring& R, const cl_symbol& varname)' `cl_univpoly_real_ring find_univpoly_ring (const cl_real_ring& R)' `cl_univpoly_real_ring find_univpoly_ring (const cl_real_ring& R, const cl_symbol& varname)' `cl_univpoly_rational_ring find_univpoly_ring (const cl_rational_ring& R)' `cl_univpoly_rational_ring find_univpoly_ring (const cl_rational_ring& R, const cl_symbol& varname)' `cl_univpoly_integer_ring find_univpoly_ring (const cl_integer_ring& R)' `cl_univpoly_integer_ring find_univpoly_ring (const cl_integer_ring& R, const cl_symbol& varname)' `cl_univpoly_modint_ring find_univpoly_ring (const cl_modint_ring& R)' `cl_univpoly_modint_ring find_univpoly_ring (const cl_modint_ring& R, const cl_symbol& varname)' These functions are equivalent to the general `find_univpoly_ring', only the return type is more specific, according to the base ring's type.  File: cln.info, Node: Functions on univariate polynomials, Next: Special polynomials, Prev: Univariate polynomial rings, Up: Univariate polynomials Functions on univariate polynomials =================================== Given a univariate polynomial ring `R', the following members can be used. `cl_ring R->basering()' This returns the base ring, as passed to `find_univpoly_ring'. `cl_UP R->zero()' This returns `0 in R', a polynomial of degree -1. `cl_UP R->one()' This returns `1 in R', a polynomial of degree <= 0. `cl_UP R->canonhom (const cl_I& x)' This returns `x in R', a polynomial of degree <= 0. `cl_UP R->monomial (const cl_ring_element& x, uintL e)' This returns a sparse polynomial: `x * X^e', where `X' is the indeterminate. `cl_UP R->create (sintL degree)' Creates a new polynomial with a given degree. The zero polynomial has degree `-1'. After creating the polynomial, you should put in the coefficients, using the `set_coeff' member function, and then call the `finalize' member function. The following are the only destructive operations on univariate polynomials. `void set_coeff (cl_UP& x, uintL index, const cl_ring_element& y)' This changes the coefficient of `X^index' in `x' to be `y'. After changing a polynomial and before applying any "normal" operation on it, you should call its `finalize' member function. `void finalize (cl_UP& x)' This function marks the endpoint of destructive modifications of a polynomial. It normalizes the internal representation so that subsequent computations have less overhead. Doing normal computations on unnormalized polynomials may produce wrong results or crash the program. The following operations are defined on univariate polynomials. `cl_univpoly_ring x.ring ()' Returns the ring to which the univariate polynomial `x' belongs. `cl_UP operator+ (const cl_UP&, const cl_UP&)' Returns the sum of two univariate polynomials. `cl_UP operator- (const cl_UP&, const cl_UP&)' Returns the difference of two univariate polynomials. `cl_UP operator- (const cl_UP&)' Returns the negative of a univariate polynomial. `cl_UP operator* (const cl_UP&, const cl_UP&)' Returns the product of two univariate polynomials. One of the arguments may also be a plain integer or an element of the base ring. `cl_UP square (const cl_UP&)' Returns the square of a univariate polynomial. `cl_UP expt_pos (const cl_UP& x, const cl_I& y)' `y' must be > 0. Returns `x^y'. `bool operator== (const cl_UP&, const cl_UP&)' `bool operator!= (const cl_UP&, const cl_UP&)' Compares two univariate polynomials, belonging to the same univariate polynomial ring, for equality. `cl_boolean zerop (const cl_UP& x)' Returns true if `x' is `0 in R'. `sintL degree (const cl_UP& x)' Returns the degree of the polynomial. The zero polynomial has degree `-1'. `cl_ring_element coeff (const cl_UP& x, uintL index)' Returns the coefficient of `X^index' in the polynomial `x'. `cl_ring_element x (const cl_ring_element& y)' Evaluation: If `x' is a polynomial and `y' belongs to the base ring, then `x(y)' returns the value of the substitution of `y' into `x'. `cl_UP deriv (const cl_UP& x)' Returns the derivative of the polynomial `x' with respect to the indeterminate `X'. The following output functions are defined (see also the chapter on input/output). `void fprint (cl_ostream stream, const cl_UP& x)' `cl_ostream operator<< (cl_ostream stream, const cl_UP& x)' Prints the univariate polynomial `x' on the `stream'. The output may depend on the global printer settings in the variable `default_print_flags'.  File: cln.info, Node: Special polynomials, Prev: Functions on univariate polynomials, Up: Univariate polynomials Special polynomials =================== The following functions return special polynomials. `cl_UP_I tschebychev (sintL n)' Returns the n-th Chebyshev polynomial (n >= 0). `cl_UP_I hermite (sintL n)' Returns the n-th Hermite polynomial (n >= 0). `cl_UP_RA legendre (sintL n)' Returns the n-th Legendre polynomial (n >= 0). `cl_UP_I laguerre (sintL n)' Returns the n-th Laguerre polynomial (n >= 0). Information how to derive the differential equation satisfied by each of these polynomials from their definition can be found in the `doc/polynomial/' directory.  File: cln.info, Node: Internals, Next: Using the library, Prev: Univariate polynomials, Up: Top Internals ********* * Menu: * Why C++ ?:: * Memory efficiency:: * Speed efficiency:: * Garbage collection::  File: cln.info, Node: Why C++ ?, Next: Memory efficiency, Prev: Internals, Up: Internals Why C++ ? ========= Using C++ as an implementation language provides * Efficiency: It compiles to machine code. * Portability: It runs on all platforms supporting a C++ compiler. Because of the availability of GNU C++, this includes all currently used 32-bit and 64-bit platforms, independently of the quality of the vendor's C++ compiler. * Type safety: The C++ compilers knows about the number types and complains if, for example, you try to assign a float to an integer variable. However, a drawback is that C++ doesn't know about generic types, hence a restriction like that `operator+ (const cl_MI&, const cl_MI&)' requires that both arguments belong to the same modular ring cannot be expressed as a compile-time information. * Algebraic syntax: The elementary operations `+', `-', `*', `=', `==', ... can be used in infix notation, which is more convenient than Lisp notation `(+ x y)' or C notation `add(x,y,&z)'. With these language features, there is no need for two separate languages, one for the implementation of the library and one in which the library's users can program. This means that a prototype implementation of an algorithm can be integrated into the library immediately after it has been tested and debugged. No need to rewrite it in a low-level language after having prototyped in a high-level language.  File: cln.info, Node: Memory efficiency, Next: Speed efficiency, Prev: Why C++ ?, Up: Internals Memory efficiency ================= In order to save memory allocations, CLN implements: * Object sharing: An operation like `x+0' returns `x' without copying it. * Garbage collection: A reference counting mechanism makes sure that any number object's storage is freed immediately when the last reference to the object is gone. * Small integers are represented as immediate values instead of pointers to heap allocated storage. This means that integers `> -2^29', `< 2^29' don't consume heap memory, unless they were explicitly allocated on the heap.  File: cln.info, Node: Speed efficiency, Next: Garbage collection, Prev: Memory efficiency, Up: Internals Speed efficiency ================ Speed efficiency is obtained by the combination of the following tricks and algorithms: * Small integers, being represented as immediate values, don't require memory access, just a couple of instructions for each elementary operation. * The kernel of CLN has been written in assembly language for some CPUs (`i386', `m68k', `sparc', `mips', `arm'). * On all CPUs, CLN may be configured to use the superefficient low-level routines from GNU GMP version 3. * For large numbers, CLN uses, instead of the standard `O(N^2)' algorithm, the Karatsuba multiplication, which is an `O(N^1.6)' algorithm. * For very large numbers (more than 12000 decimal digits), CLN uses Schönhage-Strassen multiplication, which is an asymptotically optimal multiplication algorithm. * These fast multiplication algorithms also give improvements in the speed of division and radix conversion.  File: cln.info, Node: Garbage collection, Prev: Speed efficiency, Up: Internals Garbage collection ================== All the number classes are reference count classes: They only contain a pointer to an object in the heap. Upon construction, assignment and destruction of number objects, only the objects' reference count are manipulated. Memory occupied by number objects are automatically reclaimed as soon as their reference count drops to zero. For number rings, another strategy is implemented: There is a cache of, for example, the modular integer rings. A modular integer ring is destroyed only if its reference count dropped to zero and the cache is about to be resized. The effect of this strategy is that recently used rings remain cached, whereas undue memory consumption through cached rings is avoided.  File: cln.info, Node: Using the library, Next: Customizing, Prev: Internals, Up: Top Using the library ***************** For the following discussion, we will assume that you have installed the CLN source in `$CLN_DIR' and built it in `$CLN_TARGETDIR'. For example, for me it's `CLN_DIR="$HOME/cln"' and `CLN_TARGETDIR="$HOME/cln/linuxelf"'. You might define these as environment variables, or directly substitute the appropriate values. * Menu: * Compiler options:: * Compatibility to old CLN versions:: * Include files:: * An Example:: * Debugging support::  File: cln.info, Node: Compiler options, Next: Compatibility to old CLN versions, Prev: Using the library, Up: Using the library Compiler options ================ Until you have installed CLN in a public place, the following options are needed: When you compile CLN application code, add the flags -I$CLN_DIR/include -I$CLN_TARGETDIR/include to the C++ compiler's command line (`make' variable CFLAGS or CXXFLAGS). When you link CLN application code to form an executable, add the flags $CLN_TARGETDIR/src/libcln.a to the C/C++ compiler's command line (`make' variable LIBS). If you did a `make install', the include files are installed in a public directory (normally `/usr/local/include'), hence you don't need special flags for compiling. The library has been installed to a public directory as well (normally `/usr/local/lib'), hence when linking a CLN application it is sufficient to give the flag `-lcln'.  File: cln.info, Node: Compatibility to old CLN versions, Next: Include files, Prev: Compiler options, Up: Using the library Compatibility to old CLN versions ================================= As of CLN version 1.1 all non-macro identifiers were hidden in namespace `cln' in order to avoid potential name clashes with other C++ libraries. If you have an old application, you will have to manually port it to the new scheme. The following principles will help during the transition: * All headers are now in a separate subdirectory. Instead of including `cl_'SOMETHING`.h', include `cln/'SOMETHING`.h' now. * All public identifiers (typenames and functions) have lost their `cl_' prefix. Exceptions are all the typenames of number types, (cl_N, cl_I, cl_MI, ...), rings, symbolic types (cl_string, cl_symbol) and polynomials (cl_UP_TYPE). (This is because their names would not be mnemonic enough once the namespace `cln' is imported. Even in a namespace we favor `cl_N' over `N'.) * All public _functions_ that had by a `cl_' in their name still carry that `cl_' if it is intrinsic part of a typename (as in `cl_I_to_int ()'). When developing other libraries, please keep in mind not to import the namespace `cln' in one of your public header files by saying `using namespace cln;'. This would propagate to other applications and can cause name clashes there.  File: cln.info, Node: Include files, Next: An Example, Prev: Compatibility to old CLN versions, Up: Using the library Include files ============= Here is a summary of the include files and their contents. `' General definitions, reference counting, garbage collection. `' The class cl_number. `' Functions for class cl_N, the complex numbers. `' Functions for class cl_R, the real numbers. `' Functions for class cl_F, the floats. `' Functions for class cl_SF, the short-floats. `' Functions for class cl_FF, the single-floats. `' Functions for class cl_DF, the double-floats. `' Functions for class cl_LF, the long-floats. `' Functions for class cl_RA, the rational numbers. `' Functions for class cl_I, the integers. `' Input/Output. `' Input/Output for class cl_N, the complex numbers. `' Input/Output for class cl_R, the real numbers. `' Input/Output for class cl_F, the floats. `' Input/Output for class cl_SF, the short-floats. `' Input/Output for class cl_FF, the single-floats. `' Input/Output for class cl_DF, the double-floats. `' Input/Output for class cl_LF, the long-floats. `' Input/Output for class cl_RA, the rational numbers. `' Input/Output for class cl_I, the integers. `' Flags for customizing input operations. `' Flags for customizing output operations. `' `malloc_hook', `free_hook'. `' `cl_abort'. `' Conditions/exceptions. `' Strings. `' Symbols. `' Property lists. `' General rings. `' The null ring. `' The ring of complex numbers. `' The ring of real numbers. `' The ring of rational numbers. `' The ring of integers. `' Number threory functions. `' Modular integers. `' Vectors. `' General vectors. `' General vectors over cl_number. `' General vectors over cl_N. `' General vectors over cl_R. `' General vectors over cl_RA. `' General vectors over cl_I. `' General vectors of modular integers. `' Simple vectors. `' Simple vectors over cl_number. `' Simple vectors over cl_N. `' Simple vectors over cl_R. `' Simple vectors over cl_RA. `' Simple vectors over cl_I. `' Simple vectors of general ring elements. `' Univariate polynomials. `' Univariate polynomials over the integers. `' Univariate polynomials over the rational numbers. `' Univariate polynomials over the real numbers. `' Univariate polynomials over the complex numbers. `' Univariate polynomials over modular integer rings. `' Timing facilities. `' Includes all of the above.  File: cln.info, Node: An Example, Next: Debugging support, Prev: Include files, Up: Using the library An Example ========== A function which computes the nth Fibonacci number can be written as follows. #include #include using namespace cln; // Returns F_n, computed as the nearest integer to // ((1+sqrt(5))/2)^n/sqrt(5). Assume n>=0. const cl_I fibonacci (int n) { // Need a precision of ((1+sqrt(5))/2)^-n. cl_float_format_t prec = cl_float_format((int)(0.208987641*n+5)); cl_R sqrt5 = sqrt(cl_float(5,prec)); cl_R phi = (1+sqrt5)/2; return round1( expt(phi,n)/sqrt5 ); } Let's explain what is going on in detail. The include file `' is necessary because the type `cl_I' is used in the function, and the include file `' is needed for the type `cl_R' and the floating point number functions. The order of the include files does not matter. In order not to write out `cln::'FOO we can safely import the whole namespace `cln'. Then comes the function declaration. The argument is an `int', the result an integer. The return type is defined as `const cl_I', not simply `cl_I', because that allows the compiler to detect typos like `fibonacci(n) = 100'. It would be possible to declare the return type as `const cl_R' (real number) or even `const cl_N' (complex number). We use the most specialized possible return type because functions which call `fibonacci' will be able to profit from the compiler's type analysis: Adding two integers is slightly more efficient than adding the same objects declared as complex numbers, because it needs less type dispatch. Also, when linking to CLN as a non-shared library, this minimizes the size of the resulting executable program. The result will be computed as expt(phi,n)/sqrt(5), rounded to the nearest integer. In order to get a correct result, the absolute error should be less than 1/2, i.e. the relative error should be less than sqrt(5)/(2*expt(phi,n)). To this end, the first line computes a floating point precision for sqrt(5) and phi. Then sqrt(5) is computed by first converting the integer 5 to a floating point number and than taking the square root. The converse, first taking the square root of 5, and then converting to the desired precision, would not work in CLN: The square root would be computed to a default precision (normally single-float precision), and the following conversion could not help about the lacking accuracy. This is because CLN is not a symbolic computer algebra system and does not represent sqrt(5) in a non-numeric way. The type `cl_R' for sqrt5 and, in the following line, phi is the only possible choice. You cannot write `cl_F' because the C++ compiler can only infer that `cl_float(5,prec)' is a real number. You cannot write `cl_N' because a `round1' does not exist for general complex numbers. When the function returns, all the local variables in the function are automatically reclaimed (garbage collected). Only the result survives and gets passed to the caller. The file `fibonacci.cc' in the subdirectory `examples' contains this implementation together with an even faster algorithm.  File: cln.info, Node: Debugging support, Prev: An Example, Up: Using the library Debugging support ================= When debugging a CLN application with GNU `gdb', two facilities are available from the library: * The library does type checks, range checks, consistency checks at many places. When one of these fails, the function `cl_abort()' is called. Its default implementation is to perform an `exit(1)', so you won't have a core dump. But for debugging, it is best to set a breakpoint at this function: (gdb) break cl_abort When this breakpoint is hit, look at the stack's backtrace: (gdb) where * The debugger's normal `print' command doesn't know about CLN's types and therefore prints mostly useless hexadecimal addresses. CLN offers a function `cl_print', callable from the debugger, for printing number objects. In order to get this function, you have to define the macro `CL_DEBUG' and then include all the header files for which you want `cl_print' debugging support. For example: #define CL_DEBUG #include Now, if you have in your program a variable `cl_string s', and inspect it under `gdb', the output may look like this: (gdb) print s $7 = { = { = {pointer = 0x8055b60, heappointer = 0x8055b60, word = 134568800}}, } (gdb) call cl_print(s) (cl_string) "" $8 = 134568800 Note that the output of `cl_print' goes to the program's error output, not to gdb's standard output. Note, however, that the above facility does not work with all CLN types, only with number objects and similar. Therefore CLN offers a member function `debug_print()' on all CLN types. The same macro `CL_DEBUG' is needed for this member function to be implemented. Under `gdb', you call it like this: (gdb) print s $7 = { = { = {pointer = 0x8055b60, heappointer = 0x8055b60, word = 134568800}}, } (gdb) call s.debug_print() (cl_string) "" (gdb) define cprint >call ($1).debug_print() >end (gdb) cprint s (cl_string) "" Unfortunately, this feature does not seem to work under all circumstances.  File: cln.info, Node: Customizing, Next: Index, Prev: Using the library, Up: Top Customizing *********** * Menu: * Error handling:: * Floating-point underflow:: * Customizing I/O:: * Customizing the memory allocator::  File: cln.info, Node: Error handling, Next: Floating-point underflow, Prev: Customizing, Up: Customizing Error handling ============== When a fatal error occurs, an error message is output to the standard error output stream, and the function `cl_abort' is called. The default version of this function (provided in the library) terminates the application. To catch such a fatal error, you need to define the function `cl_abort' yourself, with the prototype #include void cl_abort (void); This function must not return control to its caller.  File: cln.info, Node: Floating-point underflow, Next: Customizing I/O, Prev: Error handling, Up: Customizing Floating-point underflow ======================== Floating point underflow denotes the situation when a floating-point number is to be created which is so close to `0' that its exponent is too low to be represented internally. By default, this causes a fatal error. If you set the global variable cl_boolean cl_inhibit_floating_point_underflow to `cl_true', the error will be inhibited, and a floating-point zero will be generated instead. The default value of `cl_inhibit_floating_point_underflow' is `cl_false'.  File: cln.info, Node: Customizing I/O, Next: Customizing the memory allocator, Prev: Floating-point underflow, Up: Customizing Customizing I/O =============== The output of the function `fprint' may be customized by changing the value of the global variable `default_print_flags'.  File: cln.info, Node: Customizing the memory allocator, Prev: Customizing I/O, Up: Customizing Customizing the memory allocator ================================ Every memory allocation of CLN is done through the function pointer `malloc_hook'. Freeing of this memory is done through the function pointer `free_hook'. The default versions of these functions, provided in the library, call `malloc' and `free' and check the `malloc' result against `NULL'. If you want to provide another memory allocator, you need to define the variables `malloc_hook' and `free_hook' yourself, like this: #include namespace cln { void* (*malloc_hook) (size_t size) = ...; void (*free_hook) (void* ptr) = ...; } The `cl_malloc_hook' function must not return a `NULL' pointer. It is not possible to change the memory allocator at runtime, because it is already called at program startup by the constructors of some global variables.  File: cln.info, Node: Index, Prev: Customizing, Up: Top Index ***** * Menu: * abs (): Elementary functions. * abstract class: Ordinary number types. * acos (): Trigonometric functions. * acosh (): Hyperbolic functions. * advocacy: Why C++ ?. * Archimedes' constant: Trigonometric functions. * As()(): Conversions. * ash (): Logical functions. * asin: Trigonometric functions. * asin (): Trigonometric functions. * asinh (): Hyperbolic functions. * atan: Trigonometric functions. * atan (): Trigonometric functions. * atanh (): Hyperbolic functions. * basering (): Functions on univariate polynomials. * binomial (): Combinatorial functions. * boole (): Logical functions. * boole_1: Logical functions. * boole_2: Logical functions. * boole_and: Logical functions. * boole_andc1: Logical functions. * boole_andc2: Logical functions. * boole_c1: Logical functions. * boole_c2: Logical functions. * boole_clr: Logical functions. * boole_eqv: Logical functions. * boole_nand: Logical functions. * boole_nor: Logical functions. * boole_orc1: Logical functions. * boole_orc2: Logical functions. * boole_set: Logical functions. * boole_xor: Logical functions. * canonhom () <1>: Functions on univariate polynomials. * canonhom () <2>: Functions on modular integers. * canonhom (): Rings. * Catalan's constant: Euler gamma. * catalanconst (): Euler gamma. * ceiling1 (): Rounding functions. * ceiling2 (): Rounding functions. * Chebyshev polynomial: Special polynomials. * cis (): Trigonometric functions. * cl_abort (): Error handling. * cl_byte: Logical functions. * CL_DEBUG: Debugging support. * cl_DF: Floating-point numbers. * cl_DF_fdiv_t: Rounding functions. * cl_F <1>: Floating-point numbers. * cl_F: Ordinary number types. * cl_F_fdiv_t: Rounding functions. * cl_FF: Floating-point numbers. * cl_FF_fdiv_t: Rounding functions. * cl_float (): Conversion to floating-point numbers. * cl_float_format (): Conversion to floating-point numbers. * cl_float_format_t: Conversion to floating-point numbers. * cl_I_to_int (): Conversions. * cl_I_to_long (): Conversions. * cl_I_to_uint (): Conversions. * cl_I_to_ulong (): Conversions. * cl_idecoded_float: Functions on floating-point numbers. * cl_LF: Floating-point numbers. * cl_LF_fdiv_t: Rounding functions. * cl_modint_ring: Modular integer rings. * cl_N: Ordinary number types. * cl_number: Ordinary number types. * cl_R: Ordinary number types. * cl_R_fdiv_t: Rounding functions. * cl_RA: Ordinary number types. * cl_SF: Floating-point numbers. * cl_SF_fdiv_t: Rounding functions. * cl_string: Strings. * cl_symbol: Symbols. * coeff (): Functions on univariate polynomials. * compare (): Comparisons. * comparison: Comparisons. * compatibility: Compatibility to old CLN versions. * compiler options: Compiler options. * complex (): Elementary complex functions. * complex number <1>: Complex numbers. * complex number: Ordinary number types. * conjugate (): Elementary complex functions. * conversion <1>: Conversion functions. * conversion: Conversions. * cos (): Trigonometric functions. * cos_sin (): Trigonometric functions. * cos_sin_t: Trigonometric functions. * cosh (): Hyperbolic functions. * cosh_sinh (): Hyperbolic functions. * cosh_sinh_t: Hyperbolic functions. * create (): Functions on univariate polynomials. * customizing: Customizing. * debug_print (): Debugging support. * debugging: Debugging support. * decode_float (): Functions on floating-point numbers. * decoded_dfloat: Functions on floating-point numbers. * decoded_ffloat: Functions on floating-point numbers. * decoded_float: Functions on floating-point numbers. * decoded_lfloat: Functions on floating-point numbers. * decoded_sfloat: Functions on floating-point numbers. * default_float_format: Conversion to floating-point numbers. * default_print_flags: Customizing I/O. * default_random_state: Random number generators. * degree (): Functions on univariate polynomials. * denominator (): Elementary rational functions. * deposit_field (): Logical functions. * deriv (): Functions on univariate polynomials. * div (): Functions on modular integers. * double_approx (): Conversions. * doublefactorial (): Combinatorial functions. * dpb (): Logical functions. * equal () <1>: Symbols. * equal () <2>: Strings. * equal (): Rings. * equal_hashcode (): Comparisons. * Euler's constant: Euler gamma. * eulerconst (): Euler gamma. * evenp (): Logical functions. * exact number: Exact numbers. * exp (): Exponential and logarithmic functions. * exp1 (): Exponential and logarithmic functions. * expt () <1>: Functions on modular integers. * expt () <2>: Exponential and logarithmic functions. * expt (): Elementary functions. * expt_pos () <1>: Functions on univariate polynomials. * expt_pos () <2>: Functions on modular integers. * expt_pos () <3>: Rings. * expt_pos (): Elementary functions. * exquo (): Elementary functions. * factorial (): Combinatorial functions. * fceiling (): Rounding functions. * fceiling2 (): Rounding functions. * ffloor (): Rounding functions. * ffloor2 (): Rounding functions. * Fibonacci number: An Example. * finalize (): Functions on univariate polynomials. * find_modint_ring (): Modular integer rings. * find_univpoly_ring (): Univariate polynomial rings. * float_approx (): Conversions. * float_digits (): Functions on floating-point numbers. * float_epsilon (): Conversion to floating-point numbers. * float_exponent (): Functions on floating-point numbers. * float_negative_epsilon (): Conversion to floating-point numbers. * float_precision (): Functions on floating-point numbers. * float_radix (): Functions on floating-point numbers. * float_sign (): Functions on floating-point numbers. * floating-point number: Floating-point numbers. * floor1 (): Rounding functions. * floor2 (): Rounding functions. * fprint () <1>: Functions on univariate polynomials. * fprint () <2>: Functions on modular integers. * fprint (): Rings. * free_hook (): Customizing the memory allocator. * fround (): Rounding functions. * fround2 (): Rounding functions. * ftruncate (): Rounding functions. * ftruncate2 (): Rounding functions. * garbage collection <1>: Garbage collection. * garbage collection: Memory efficiency. * gcd (): Number theoretic functions. * GMP <1>: Using the GNU MP Library. * GMP: Introduction. * header files: Include files. * hermite (): Special polynomials. * Hermite polynomial: Special polynomials. * imagpart (): Elementary complex functions. * include files: Include files. * Input/Output: Input/Output. * installation: Installing the library. * instanceof (): Rings. * integer: Ordinary number types. * integer_decode_float (): Functions on floating-point numbers. * integer_length (): Logical functions. * isqrt (): Roots. * laguerre (): Special polynomials. * Laguerre polynomial: Special polynomials. * lcm (): Number theoretic functions. * ldb (): Logical functions. * ldb_test (): Logical functions. * least_negative_float (): Conversion to floating-point numbers. * least_positive_float (): Conversion to floating-point numbers. * Legende polynomial: Special polynomials. * legendre (): Special polynomials. * length (): Strings. * ln (): Exponential and logarithmic functions. * log (): Exponential and logarithmic functions. * logand (): Logical functions. * logandc1 (): Logical functions. * logandc2 (): Logical functions. * logbitp (): Logical functions. * logcount (): Logical functions. * logeqv (): Logical functions. * logior (): Logical functions. * lognand (): Logical functions. * lognor (): Logical functions. * lognot (): Logical functions. * logorc1 (): Logical functions. * logorc2 (): Logical functions. * logp (): Number theoretic functions. * logtest (): Logical functions. * logxor (): Logical functions. * make: Make utility. * malloc_hook (): Customizing the memory allocator. * mask_field (): Logical functions. * max (): Comparisons. * min (): Comparisons. * minus (): Rings. * minus1 (): Elementary functions. * minusp (): Comparisons. * mod (): Rounding functions. * modifying operators: Obfuscating operators. * modular integer: Modular integers. * modulus: Functions on modular integers. * monomial (): Functions on univariate polynomials. * Montgomery multiplication: Modular integer rings. * most_negative_float (): Conversion to floating-point numbers. * most_positive_float (): Conversion to floating-point numbers. * mul (): Rings. * namespace <1>: Compatibility to old CLN versions. * namespace: Introduction. * numerator (): Elementary rational functions. * oddp (): Logical functions. * one () <1>: Functions on univariate polynomials. * one () <2>: Functions on modular integers. * one (): Rings. * operator != () <1>: Functions on univariate polynomials. * operator != () <2>: Functions on modular integers. * operator != () <3>: Modular integer rings. * operator != (): Comparisons. * operator & (): Logical functions. * operator &= (): Obfuscating operators. * operator () (): Functions on univariate polynomials. * operator * () <1>: Functions on univariate polynomials. * operator * () <2>: Functions on modular integers. * operator * (): Elementary functions. * operator *= (): Obfuscating operators. * operator + () <1>: Functions on univariate polynomials. * operator + () <2>: Functions on modular integers. * operator + (): Elementary functions. * operator ++ (): Obfuscating operators. * operator += (): Obfuscating operators. * operator - () <1>: Functions on univariate polynomials. * operator - () <2>: Functions on modular integers. * operator - (): Elementary functions. * operator -- (): Obfuscating operators. * operator -= (): Obfuscating operators. * operator / (): Elementary functions. * operator /= (): Obfuscating operators. * operator < (): Comparisons. * operator << () <1>: Functions on univariate polynomials. * operator << () <2>: Functions on modular integers. * operator << (): Logical functions. * operator <<= (): Obfuscating operators. * operator <= (): Comparisons. * operator == () <1>: Functions on univariate polynomials. * operator == () <2>: Functions on modular integers. * operator == () <3>: Modular integer rings. * operator == (): Comparisons. * operator > (): Comparisons. * operator >= (): Comparisons. * operator >> () <1>: Functions on modular integers. * operator >> (): Logical functions. * operator >>= (): Obfuscating operators. * operator [] (): Strings. * operator ^ (): Logical functions. * operator ^= (): Obfuscating operators. * operator | (): Logical functions. * operator |= (): Obfuscating operators. * operator ~ (): Logical functions. * ord2 (): Logical functions. * phase (): Exponential and logarithmic functions. * pi: Trigonometric functions. * pi (): Trigonometric functions. * plus (): Rings. * plus1 (): Elementary functions. * plusp (): Comparisons. * polynomial: Univariate polynomials. * portability: Why C++ ?. * power2p (): Logical functions. * printing: Internal and printed representation. * random (): Functions on modular integers. * random32 (): Random number generators. * random_F (): Random number generators. * random_I (): Random number generators. * random_R (): Random number generators. * random_state: Random number generators. * rational (): Conversion to rational numbers. * rational number: Ordinary number types. * rationalize (): Conversion to rational numbers. * reading: Internal and printed representation. * real number: Ordinary number types. * realpart (): Elementary complex functions. * recip () <1>: Functions on modular integers. * recip (): Elementary functions. * reference counting: Memory efficiency. * rem (): Rounding functions. * representation: Internal and printed representation. * retract (): Functions on modular integers. * Riemann's zeta: Riemann zeta. * ring: Modular integer rings. * ring () <1>: Functions on univariate polynomials. * ring (): Functions on modular integers. * rootp (): Roots. * round1 (): Rounding functions. * round2 (): Rounding functions. * rounding: Rounding functions. * rounding error: Floating-point numbers. * Rubik's cube: Conversions. * scale_float (): Functions on floating-point numbers. * Schönhage-Strassen multiplication <1>: Speed efficiency. * Schönhage-Strassen multiplication: Introduction. * sed: Sed utility. * set_coeff (): Functions on univariate polynomials. * signum (): Elementary functions. * sin (): Trigonometric functions. * sinh (): Hyperbolic functions. * sqrt (): Roots. * sqrtp (): Roots. * square () <1>: Functions on univariate polynomials. * square () <2>: Functions on modular integers. * square () <3>: Rings. * square (): Elementary functions. * string: Strings. * strlen (): Strings. * symbol: Symbols. * symbolic type: Symbolic data types. * tan (): Trigonometric functions. * tanh (): Hyperbolic functions. * The()(): Conversions. * transcendental functions: Transcendental functions. * truncate1 (): Rounding functions. * truncate2 (): Rounding functions. * tschebychev (): Special polynomials. * uminus (): Rings. * underflow: Floating-point underflow. * univariate polynomial: Univariate polynomials. * WANT_OBFUSCATING_OPERATORS: Obfuscating operators. * xgcd (): Number theoretic functions. * zero () <1>: Functions on univariate polynomials. * zero () <2>: Functions on modular integers. * zero (): Rings. * zerop () <1>: Functions on univariate polynomials. * zerop () <2>: Functions on modular integers. * zerop () <3>: Rings. * zerop (): Comparisons. * zeta (): Riemann zeta.  Tag Table: Node: Top931 Node: Introduction3191 Node: Installation5812 Node: Prerequisites6106 Node: C++ compiler6304 Node: Make utility7016 Node: Sed utility7202 Node: Building the library7522 Node: Using the GNU MP Library10745 Node: Installing the library11621 Node: Cleaning up12344 Node: Ordinary number types12669 Node: Exact numbers15022 Node: Floating-point numbers16187 Node: Complex numbers19766 Node: Conversions20263 Node: Functions on numbers23723 Node: Constructing numbers24427 Node: Constructing integers24799 Node: Constructing rational numbers25089 Node: Constructing floating-point numbers25564 Node: Constructing complex numbers26684 Node: Elementary functions27048 Node: Elementary rational functions29517 Node: Elementary complex functions30089 Node: Comparisons30917 Node: Rounding functions32810 Node: Roots38587 Node: Transcendental functions40468 Node: Exponential and logarithmic functions41024 Node: Trigonometric functions43029 Node: Hyperbolic functions46359 Node: Euler gamma48423 Node: Riemann zeta49315 Node: Functions on integers49859 Node: Logical functions50147 Node: Number theoretic functions56100 Node: Combinatorial functions57467 Node: Functions on floating-point numbers58145 Node: Conversion functions61355 Node: Conversion to floating-point numbers61635 Node: Conversion to rational numbers63852 Node: Random number generators64906 Node: Obfuscating operators66557 Node: Input/Output68287 Node: Internal and printed representation68497 Node: Input functions71039 Node: Output functions75524 Node: Rings79184 Node: Modular integers81108 Node: Modular integer rings81308 Node: Functions on modular integers83393 Node: Symbolic data types86397 Node: Strings86660 Node: Symbols87725 Node: Univariate polynomials88627 Node: Univariate polynomial rings88885 Node: Functions on univariate polynomials93801 Node: Special polynomials97576 Node: Internals98283 Node: Why C++ ?98497 Node: Memory efficiency99997 Node: Speed efficiency100695 Node: Garbage collection101779 Node: Using the library102606 Node: Compiler options103178 Node: Compatibility to old CLN versions104116 Node: Include files105537 Node: An Example109252 Node: Debugging support112518 Node: Customizing114869 Node: Error handling115097 Node: Floating-point underflow115672 Node: Customizing I/O116311 Node: Customizing the memory allocator116601 Node: Index117585  End Tag Table