Tempest_in_Action/tempest-devel/resources/examples/testfiles/mdp/wlan0_collide.nm

// WLAN PROTOCOL (two stations)
// discrete time model
// gxn/jzs 20/02/02

mdp

// COLLISIONS
const int COL; // maximum number of collisions

// TIMING CONSTRAINTS
// we have used the FHSS parameters
// then scaled by the value of ASLOTTIME
const int ASLOTTIME = 1;
const int DIFS = 3; // due to scaling can be either 2 or 3 which is modelled by a non-deterministic choice
const int VULN = 1; // due to scaling can be either 0 or 1 which is modelled by a non-deterministic choice
const int TRANS_TIME_MAX; // scaling up
const int TRANS_TIME_MIN = 4; // scaling down
const int ACK_TO = 6; 
const int ACK = 4; // due to scaling can be either 3 or 4 which is modelled by a non-deterministic choice
const int SIFS = 1; // due to scaling can be either 0 or 1 which is modelled by a non-deterministic choice
// maximum constant used in timing constraints + 1
const int TIME_MAX = max(ACK_TO,TRANS_TIME_MAX)+1;

// CONTENTION WINDOW
// CWMIN =15 & CWMAX =16
// this means that MAX_BACKOFF IS 2
const int MAX_BACKOFF = 0;

//-----------------------------------------------------------------//
// THE MEDIUM/CHANNEL

// FORMULAE FOR THE CHANNEL
// channel is busy
formula busy = c1>0 | c2>0;
// channel is free
formula free = c1=0 & c2=0;

module medium
	
	// number of collisions
	col : [0..COL];
	
	// medium status 
	c1 : [0..2];
	c2 : [0..2];
	// ci corresponds to messages associated with station i
	// 0 nothing being sent
	// 1 being sent correctly
	// 2 being sent garbled	  
	
	// begin sending message and nothing else currently being sent
	[send1] c1=0 & c2=0 -> (c1'=1);
	[send2] c2=0 & c1=0 -> (c2'=1);
	
	// begin sending message and  something is already being sent
	// in this case both messages become garbled
	[send1] c1=0 & c2>0 -> (c1'=2) & (c2'=2) & (col'=min(col+1,COL));
	[send2] c2=0 & c1>0 -> (c1'=2) & (c2'=2) & (col'=min(col+1,COL));
	
	// finish sending message
	[finish1] c1>0 -> (c1'=0);
	[finish2] c2>0 -> (c2'=0);

endmodule

//-----------------------------------------------------------------//
// STATION 1
module station1
	// clock for station 1
	x1 : [0..TIME_MAX];
	
	// local state
	s1 : [1..12];
	// 1 sense
	// 2 wait until free before setting backoff
	// 3 wait for DIFS then set slot
	// 4 set backoff 
	// 5 backoff
	// 6 wait until free in backoff
	// 7 wait for DIFS then resume backoff
	// 8 vulnerable 
	// 9 transmit
	// 11 wait for SIFS and then ACK
	// 10 wait for ACT_TO 
	// 12 done
	// BACKOFF
	// separate into slots
	slot1 : [0..1]; 
	backoff1 : [0..15];
	
	// BACKOFF COUNTER
	bc1 : [0..1];
	// SENSE
	// let time pass
	[time] s1=1 & x1<DIFS & free -> (x1'=min(x1+1,TIME_MAX));
	// ready to transmit
	[] s1=1 & (x1=DIFS | x1=DIFS-1) -> (s1'=8) & (x1'=0);
	// found channel busy so wait until free
	[] s1=1 & busy -> (s1'=2) & (x1'=0);
	// WAIT UNTIL FREE BEFORE SETTING BACKOFF
	// let time pass (no need for the clock x1 to change)
	[time] s1=2 & busy -> (s1'=2);
	// find that channel is free so check its free for DIFS before setting backoff
	[] s1=2 & free -> (s1'=3);
	// WAIT FOR DIFS THEN SET BACKOFF
	// let time pass
	[time] s1=3 & x1<DIFS & free -> (x1'=min(x1+1,TIME_MAX));
	// found channel busy so wait until free
	[] s1=3 & busy -> (s1'=2) & (x1'=0);
	// start backoff  first uniformly choose slot
	// backoff counter 0
	[] s1=3 & (x1=DIFS | x1=DIFS-1) & bc1=0 -> (s1'=4) & (x1'=0) & (slot1'=0) & (bc1'=min(bc1+1,MAX_BACKOFF));
	// SET BACKOFF (no time can pass)
	// chosen slot now set backoff
	[] s1=4 -> 1/16 : (s1'=5) & (backoff1'=0 )
	         + 1/16 : (s1'=5) & (backoff1'=1 )
	         + 1/16 : (s1'=5) & (backoff1'=2 )
	         + 1/16 : (s1'=5) & (backoff1'=3 )
	         + 1/16 : (s1'=5) & (backoff1'=4 )
	         + 1/16 : (s1'=5) & (backoff1'=5 )
	         + 1/16 : (s1'=5) & (backoff1'=6 )
	         + 1/16 : (s1'=5) & (backoff1'=7 )
	         + 1/16 : (s1'=5) & (backoff1'=8 )
	         + 1/16 : (s1'=5) & (backoff1'=9 )
	         + 1/16 : (s1'=5) & (backoff1'=10)
	         + 1/16 : (s1'=5) & (backoff1'=11)
	         + 1/16 : (s1'=5) & (backoff1'=12)
	         + 1/16 : (s1'=5) & (backoff1'=13)
	         + 1/16 : (s1'=5) & (backoff1'=14)
	         + 1/16 : (s1'=5) & (backoff1'=15);
	// BACKOFF
	// let time pass
	[time] s1=5 & x1<ASLOTTIME & free -> (x1'=min(x1+1,TIME_MAX));
	// decrement backoff
	[] s1=5 & x1=ASLOTTIME & backoff1>0 -> (s1'=5) & (x1'=0) & (backoff1'=backoff1-1);	
	[] s1=5 & x1=ASLOTTIME & backoff1=0 & slot1>0 -> (s1'=5) & (x1'=0) & (backoff1'=15) & (slot1'=slot1-1);	
	// finish backoff 
	[] s1=5 & x1=ASLOTTIME & backoff1=0 & slot1=0 -> (s1'=8) & (x1'=0);
	// found channel busy
	[] s1=5 & busy -> (s1'=6) & (x1'=0);
	// WAIT UNTIL FREE IN BACKOFF
	// let time pass (no need for the clock x1 to change)
	[time] s1=6 & busy -> (s1'=6);
	// find that channel is free
	[] s1=6 & free -> (s1'=7);
	
	// WAIT FOR DIFS THEN RESUME BACKOFF
	// let time pass
	[time] s1=7 & x1<DIFS & free -> (x1'=min(x1+1,TIME_MAX));
	// resume backoff (start again from previous backoff)
	[] s1=7 & (x1=DIFS | x1=DIFS-1) -> (s1'=5) & (x1'=0);
	// found channel busy
	[] s1=7 & busy -> (s1'=6) & (x1'=0);
	
	// VULNERABLE
	// let time pass
	[time] s1=8 & x1<VULN -> (x1'=min(x1+1,TIME_MAX));
	// move to transmit
	[send1] s1=8 & (x1=VULN | x1=VULN-1) -> (s1'=9) & (x1'=0);
	// TRANSMIT
	// let time pass
	[time] s1=9 & x1<TRANS_TIME_MAX -> (x1'=min(x1+1,TIME_MAX));
	// finish transmission successful	
	[finish1] s1=9 & x1>=TRANS_TIME_MIN & c1=1 -> (s1'=10) & (x1'=0);
	// finish transmission garbled
	[finish1] s1=9 & x1>=TRANS_TIME_MIN & c1=2 -> (s1'=11) & (x1'=0);
	// WAIT FOR SIFS THEN WAIT FOR ACK
	
	// WAIT FOR SIFS i.e. c1=0
	// check channel and busy: go into backoff
	[] s1=10 & c1=0 & x1=0 & busy -> (s1'=2);
	// check channel and free: let time pass
	[time] s1=10 & c1=0 & x1=0 & free -> (x1'=min(x1+1,TIME_MAX));
	// let time pass
	// following guard is always false as SIFS=1
	// [time] s1=10 & c1=0 & x1>0 & x1<SIFS -> (x1'=min(x1+1,TIME_MAX));
	// ack is sent after SIFS (since SIFS-1=0 add condition that channel is free)
	[send1] s1=10 & c1=0 & (x1=SIFS | (x1=SIFS-1 & free)) -> (s1'=10) & (x1'=0);
	
	// WAIT FOR ACK i.e. c1=1
	// let time pass
	[time] s1=10 & c1=1 & x1<ACK -> (x1'=min(x1+1,TIME_MAX));
	// get acknowledgement so packet sent correctly and move to done
	[finish1] s1=10 & c1=1 & (x1=ACK | x1=ACK-1) -> (s1'=12) & (x1'=0) & (bc1'=0);
	
	// WAIT FOR ACK_TO
	// check channel and busy: go into backoff
	[] s1=11 & x1=0 & busy -> (s1'=2);
	// check channel and free: let time pass
	[time] s1=11 & x1=0 & free -> (x1'=min(x1+1,TIME_MAX));
	// let time pass
	[time] s1=11 & x1>0 & x1<ACK_TO -> (x1'=min(x1+1,TIME_MAX));
	// no acknowledgement (go to backoff waiting DIFS first)
	[] s1=11 & x1=ACK_TO -> (s1'=3) & (x1'=0);
		
	// DONE
	[time] s1=12 -> (s1'=12);

endmodule	

// ---------------------------------------------------------------------------- //
// STATION 2 (rename STATION 1)
module 
station2=station1[x1=x2, 
                  s1=s2,
				  s2=s1,
				  c1=c2,
				  c2=c1, 
				  slot1=slot2, 
				  backoff1=backoff2, 
				  bc1=bc2, 
				  send1=send2, 
				  finish1=finish2] 
endmodule
// ---------------------------------------------------------------------------- //

label "twoCollisions" = col=2;
label "fourCollisions" = col=4;
label "sixCollisions" = col=6;